Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Samaritans no anyone?
https://forums.tipec.net/viewtopic.php?f=25&t=1903
Page 1 of 4

Author:  J.J. [ Mon Oct 06, 2008 5:50 pm ]
Post subject:  Samaritans no anyone?

Not a good day. :cry:
Car went to my mate to have the cambox gasket fitted & cure the oil leak. It was only a couple of miles to the garage. Inlet valve stuck open & the piston hit it. So now it needs a head over haul as well. One new inlet at least. Waiting to find out if the head is ok to recon. It had a turbo gasket on it. This is going to hurt. Could have got a new head off ebay for £45 recently. Why didn't I? :(
It was all nearly sorted as well.

Author:  lindsayhbrown [ Mon Oct 06, 2008 6:08 pm ]
Post subject:  Re: Samaritans no anyone?

thats a bit of bad luck, any idea what caused it to stick ?

Author:  Li Moo Bai [ Mon Oct 06, 2008 6:34 pm ]
Post subject:  Re: Samaritans no anyone?

Buggeration :x

Was it a valve spring broke you think?

Who have you got looking at the head then?

Author:  J.J. [ Mon Oct 06, 2008 8:53 pm ]
Post subject:  Re: Samaritans no anyone?

It's gone to a machine shop in Oldham to see if it's saveable. The valve was badly discoloured so it must have been sticking for a while. The head gasket looked like it was nearly dead. Theres a nasty lump on the alloy that looks like the casting may have been leaking! If so the heads stuffed. So yes it's a more bad luck. Valve springs look ok. They will be tested if the heads ok.
Somewhat disapointed. The pressure to sell is mounting.(Darn't tell the wife. That would be it.) Just searched ebay & there are no heads available at all.

Author:  ExAudiSi [ Mon Oct 06, 2008 9:39 pm ]
Post subject:  Re: Samaritans no anyone?

Have you seen this post?

viewtopic.php?f=25&t=1734

There is a cylinder head listed, albeit with bent valves, maybe worth checking to see if it is still available?

Author:  Daz85lux [ Mon Oct 06, 2008 10:27 pm ]
Post subject:  Re: Samaritans no anyone?

J.J. wrote:
Just searched ebay & there are no heads available at all.

I have a full engine still in my '82 if you need anything :wink:

Author:  trx [ Mon Oct 06, 2008 10:55 pm ]
Post subject:  Re: Samaritans no anyone?

got a full head here in my shed JJ has a few pits in it but was ok when on my car,
only changed it because i had the spare one skimmed and ready for a quick turn round then found out it was the oil-cooler seals :shock:
i live near Leigh about 30 miles away from fax.
Dave

Author:  tr7v8 [ Tue Oct 07, 2008 6:17 am ]
Post subject:  Re: Samaritans no anyone?

J.J. wrote:
The pressure to sell is mounting.(Darn't tell the wife. That would be it.)

:o Don't let the car hear that :(
I'm sure EMC will have an 8 Valve head for sensible money.

Author:  J.J. [ Tue Oct 07, 2008 5:27 pm ]
Post subject:  Re: Samaritans no anyone?

Thanks for all the replys. :) After all the work & money spent I can't quite believe it. Still waiting for the verdict on the old one. At least only one valve needed. The liners look perfect. Not sure why it was sticking in the first place though. Maybe the valve springs have got tired. :?

Author:  Li Moo Bai [ Wed Oct 08, 2008 7:19 am ]
Post subject:  Re: Samaritans no anyone?

If it is salvagable you will presumably want all new springs and perhaps stem seals too?

Fingers x'd for you mate.

Adam

edit: and a new gasket of course!

Author:  Daz85lux [ Thu Oct 09, 2008 9:44 am ]
Post subject:  Re: Samaritans no anyone?

Here's one:

http://cgi.ebay.co.uk/Porsche-944-2-5l-1984-Cylinder-Head-Cam-Box-Valves-etc_W0QQitemZ320308927738QQcmdZViewItem?hash=item320308927738&_trkparms=39%3A1%7C66%3A2%7C65%3A10%7C240%3A1318&_trksid=p3286.c0.m14

Longest link ever :lol:

Author:  Li Moo Bai [ Thu Oct 09, 2008 10:03 am ]
Post subject:  Re: Samaritans no anyone?

Daz85lux wrote:


Interesting. That's not far from me. I might be able to go along and have a look at it?

Adam

Author:  J.J. [ Thu Oct 09, 2008 6:00 pm ]
Post subject:  Re: Samaritans no anyone?

Thanks guys. Your stars. :D Still havn't heard from the engineer doing it so thats probably good news. He muttered somthing about the valves being the same as a VW van. Once he has the valve he will start to machine it up. The dodgey looking bit is over the middle between the wet liners so may just be a bit of corosion. Hopefully will know by Saturday.

Author:  colt45_gto [ Thu Oct 09, 2008 9:32 pm ]
Post subject:  Re: Samaritans no anyone?

J.J. wrote:
It's gone to a machine shop in Oldham to see if it's saveable. The valve was badly discoloured so it must have been sticking for a while. The head gasket looked like it was nearly dead. Theres a nasty lump on the alloy that looks like the casting may have been leaking! If so the heads stuffed. So yes it's a more bad luck. Valve springs look ok. They will be tested if the heads ok.
Somewhat disapointed. The pressure to sell is mounting.(Darn't tell the wife. That would be it.) Just searched ebay & there are no heads available at all.

steve at oldham engine center is excellent the place is possibly the best around. mention me (dave from millfold) see if you get and discount? probably not but there ya go. anyway if it can be done they will do it. and their skimming is second to non the faces are like mirrors after ;)
btw they supplied all my engine stuff and skimmed my heads and ground the crank.

Author:  lindsayhbrown [ Thu Oct 09, 2008 10:59 pm ]
Post subject:  Re: Samaritans no anyone?

and this one http://cgi.ebay.co.uk/PORSCHE-924-S-944 ... 286.c0.m14

Page 1 of 4 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/