The one in the middle of the photo,
Thanks, Rich
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| What is this switch for? https://forums.tipec.net/viewtopic.php?f=25&t=18958 |
Page 1 of 1 |
| Author: | richlyons [ Sun Nov 30, 2014 9:27 pm ] |
| Post subject: | What is this switch for? |
The one in the middle of the photo, Thanks, Rich |
|
| Author: | ALZ1933 [ Sun Nov 30, 2014 9:35 pm ] |
| Post subject: | Re: What is this switch for? |
Its used to switch off the driving lights in the front bumper,the ones that come on with your mainbeam. |
|
| Author: | richlyons [ Sun Nov 30, 2014 10:25 pm ] |
| Post subject: | Re: What is this switch for? |
Thought so, I think I have a wiring issue then... Thanks for your help 
|
|
| Author: | ALZ1933 [ Mon Dec 01, 2014 8:17 am ] |
| Post subject: | Re: What is this switch for? |
Take the switch out & see if its wired up, only models of a certain year had this switch and perhaps a previous owner filled the blank with a dummy switch? |
|
| Author: | richlyons [ Wed Dec 03, 2014 7:20 pm ] |
| Post subject: | Re: What is this switch for? |
Its wired up, I put new bulbs in too so its not them. I'll have to have a play with a multi meter when I get time! |
|
| Author: | Althejazzman [ Wed Dec 03, 2014 9:32 pm ] |
| Post subject: | Re: What is this switch for? |
Do be aware that this switch only activates the bumper lights full beam when you also have the stalk pulled for full beam on the popup lights. |
|
| Author: | richlyons [ Wed Dec 03, 2014 9:37 pm ] |
| Post subject: | Re: What is this switch for? |
Oh right, I'll give that ago first. Thanks |
|
| Author: | richlyons [ Wed Dec 03, 2014 10:20 pm ] |
| Post subject: | Re: What is this switch for? |
Just tried it like you said and I can here the relay clicking |
|
| Author: | Althejazzman [ Wed Dec 03, 2014 10:22 pm ] |
| Post subject: | Re: What is this switch for? |
richlyons wrote: Just tried it like you said and I can here the relay clicking Clean all your fuses, test for 12v at the fuse terminals, then test for 12v at the bulb terminals. |
|
| Author: | 944 Man [ Wed Dec 03, 2014 11:31 pm ] |
| Post subject: | Re: What is this switch for? |
Itll be an earth problem - it always is. All series one 944s and all 924s had a switch; it was only series two 944s which couldn't turn them off. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|