| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 944 s2 de-cat pipe https://forums.tipec.net/viewtopic.php?f=25&t=18666 |
Page 1 of 1 |
| Author: | rapidstu [ Wed Oct 08, 2014 11:36 am ] |
| Post subject: | 944 s2 de-cat pipe |
Can anyone recomend a de-cat pipe for my cab. Promax tell me there one only fits the coupe and not the cab! I have a hayward & scott one on my coupe and just out of interest i might try fitting that to see if the floor pans are different. What have you cab owners got fitted? Thanks |
|
| Author: | AlpineTurbo [ Wed Oct 08, 2014 5:17 pm ] |
| Post subject: | Re: 944 s2 de-cat pipe |
I cannot answer your question but the floorpans are surprisingly different on the Cabrio when compared to a 944. If it were me I would be tempted to go and have a discussion with an exhaust agent to see what can be done. |
|
| Author: | rapidstu [ Wed Oct 08, 2014 5:40 pm ] |
| Post subject: | Re: 944 s2 de-cat pipe |
its Janspeed, but i need a minimum order of 10, any other owners want one? |
|
| Author: | 944-Scott [ Wed Oct 08, 2014 6:59 pm ] |
| Post subject: | Re: 944 s2 de-cat pipe |
As its only a decat you want your local powerflow dealer should be more than capable of sorting it out for you. A straight through pipe with the standard rear silencer has quite a nice note. |
|
| Author: | rapidstu [ Fri Oct 10, 2014 4:58 pm ] |
| Post subject: | Re: 944 s2 de-cat pipe |
It looks like i am going to make my own, has anybody got a scrap one i can use as a pattern so i don't have to take my car of the road,. i don't mind paying. |
|
| Author: | JA50N [ Mon Oct 27, 2014 6:11 pm ] |
| Post subject: | Re: 944 s2 de-cat pipe |
Hi I have a Hayward and Scott one had it years and has been fine and same as coupe Jason |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|