| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| S2 fuel rail spacer https://forums.tipec.net/viewtopic.php?f=25&t=18558 |
Page 1 of 1 |
| Author: | sgl1966 [ Wed Sep 17, 2014 5:32 pm ] |
| Post subject: | S2 fuel rail spacer |
Hi, can anyone tell me if the fuel rail spacer washers on the S2 are needed ? I can bolt my fuel rail down without them and i can see they could easily slip into a bore if not carefull. Thanks |
|
| Author: | timmyturtle [ Wed Sep 17, 2014 7:33 pm ] |
| Post subject: | Re: S2 fuel rail spacer |
I put mine on,but for some reason i had different sized ones from two different engines. I used the smaller ones. I guess without them,the injectors might sit too far into the manifold and cause airflow disruption or even damage to the injector by having air blasted at them? |
|
| Author: | Minksport [ Wed Sep 17, 2014 10:00 pm ] |
| Post subject: | Re: S2 fuel rail spacer |
Didn't use mine Simon and the car still runs fine! Mark |
|
| Author: | timmyturtle [ Wed Sep 17, 2014 10:03 pm ] |
| Post subject: | Re: S2 fuel rail spacer |
They must be there for a good reason ,thats why i did fit them |
|
| Author: | sgl1966 [ Thu Sep 18, 2014 7:06 am ] |
| Post subject: | Re: S2 fuel rail spacer |
Thanks for the response. It just seems strange Porsche did not make the rail supports 5mm longer and do away with these washers as though they were an after thought maybe for a different length injector. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|