| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 944/924 gaz golds https://forums.tipec.net/viewtopic.php?f=25&t=18537 |
Page 1 of 1 |
| Author: | nicksonmsport [ Sun Sep 14, 2014 9:32 pm ] |
| Post subject: | 944/924 gaz golds |
Any difference between the kits for 924/944 gaz golds. If so what is the difference? Cheers nick |
|
| Author: | Carrera RSR [ Mon Sep 15, 2014 7:44 pm ] |
| Post subject: | Re: 944/924 gaz golds |
944 kit won't fit the 924 up front unless the 924 is running 944 spindles. The bolt holes/width are not the same. Although someone did post somewhere that they 'massaged' them to line up. |
|
| Author: | nicksonmsport [ Mon Sep 15, 2014 8:31 pm ] |
| Post subject: | Re: 944/924 gaz golds |
Ok thats great cheers. Useful info thanks. Rears the same then I take it cheers nick |
|
| Author: | Richair [ Mon Sep 15, 2014 8:41 pm ] |
| Post subject: | Re: 944/924 gaz golds |
The 924/early 944 hub flange where the strut bolts up is slightly wider on the earlier car and is the same width as a Golf. The later 944's (951 and '87 onwards 944) have a narrower 18mm strut flange, so earlier can be fitted to later with washers apparently but not the other way around without machining the flange or swapping the hubs. HTH! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|