| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Digital clock instructions https://forums.tipec.net/viewtopic.php?f=25&t=18477 |
Page 1 of 1 |
| Author: | StanLee944S2 [ Sat Sep 06, 2014 11:49 pm ] |
| Post subject: | Digital clock instructions |
Hi all, just fitted a new screen to digital clock.. I have pressed one of the three buttons and the numbers digits are flashing in what looks like a 'test mode'. Does anyone have instructions on how to change time or even set the time and what each button is for? |
|
| Author: | AlpineTurbo [ Sun Sep 07, 2014 8:07 am ] |
| Post subject: | Re: Digital clock instructions |
it is probably either stuck in the stopwatch mode (in which case press button no.3) or the connectors to the screen have not been put on straight (when I did mine this was quite a tricky thing to get right, and with the clock half diassembled it took me a few goes until the characters displayed correctly. From my vague recollection (Google is your friend here) the buttons do the following: Clock: No.3 changes to the stopwatch mode 1 & 2 (from memory) allow you to change the clock's time with all three buttons adjusting the time and whether you want the clock to display in a 12 or 24Hr format. Stopwatch: 1- Starts/stops the stopwatch 2- resets the watch back to 0 3- Goes back to the clock. |
|
| Author: | StanLee944S2 [ Sun Sep 07, 2014 11:04 pm ] |
| Post subject: | Re: Digital clock instructions |
Many thanks, I used the instructions to set the time which bizarrely came up fine when going up the hours and mins in a clear digit so it works! I think when I mentioned that things were flashing.. It was the stopwatch.. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|