Nick - looking for one of these - Turbo Drop Link:
Attachment:
Stabiliser.JPG [ 27.28 KiB | Viewed 1757 times ]
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 924 turbo parts clearance https://forums.tipec.net/viewtopic.php?f=25&t=18394 |
Page 1 of 1 |
| Author: | nicksonmsport [ Wed Aug 27, 2014 11:41 am ] |
| Post subject: | 924 turbo parts clearance |
all the parts I don't need for the build as they are being replaced with new items pair of doors turbo bonnet with naca duct and bonnet pins tailgate custom strut brace front wings in vgc , lips rolled front bumper with fogs lower front valence fibreglass gear linkage exhaust bracket rear torque tube rear subframe/torsion bar tube etc rear steel trailing arms with 5 stud hubs aluminium rear subframe mounts with good bushes spring plates 944 turbo torsion bars M030 25.5mm used or recon turbochargers rear arb headlights and mechanism rear brake discs and calipers vgc front brake discs and calipers/braided lines vgc front 5 stud hubs vgc rear driveshafts rear wheel arches, black rubber type metal fuel lines various rear 1/4 glass torque tube sill covers (for hole in sill for torsion adjustment) fuel pump and damper new fuel lines to suit fuel tank vgc tank straps wheel spacers x2 5mm if you need anything give me a shout, would like to clear it all so sensible prices thanks nick info@nicksonmotorsport.co.uk 07500665681 |
|
| Author: | nicksonmsport [ Sat Aug 30, 2014 2:52 pm ] |
| Post subject: | Re: 924 turbo parts clearance |
Bump for bits. Keen to clear this lot to make way for new parts get in touch with anything you need cheers nick |
|
| Author: | domdomt [ Wed Sep 03, 2014 8:58 pm ] |
| Post subject: | Re: 924 turbo parts clearance |
How much for the rear discs and what kind of job is it to fit onto a car with drums? I have a 924 with drums |
|
| Author: | lesworth [ Mon Sep 22, 2014 12:47 pm ] |
| Post subject: | Re: 924 turbo parts clearance |
Do you have the in-tank fuel pump available or just the external pump? |
|
| Author: | lesworth [ Thu Oct 23, 2014 8:27 am ] |
| Post subject: | Re: 924 turbo parts clearance |
Nick - looking for one of these - Turbo Drop Link: Attachment: Stabiliser.JPG [ 27.28 KiB | Viewed 1757 times ] |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|