| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Bleeding 944 s2 brake questions https://forums.tipec.net/viewtopic.php?f=25&t=18021 |
Page 1 of 1 |
| Author: | marks2ply [ Wed Jun 25, 2014 11:15 am ] |
| Post subject: | Bleeding 944 s2 brake questions |
Hi all I have bought a gunson self ezibleed kit, along with a spare wheel/tyre from a scrap yard. I am going to bleed the brakes thoroughly this week any tips? I have also bought some brake fluids from my local motor factors giving full details of the car, they supplied me DOT 4 fluid that is Synthetic. Is this okay? Finally what torque do I set for my wheel nuts, and is this best achieved in stages. Any help is most welcome. Mark |
|
| Author: | Waylander [ Wed Jun 25, 2014 1:24 pm ] |
| Post subject: | Re: Bleeding 944 s2 brake questions |
although there is no definitive method of bleeding the brakes in the manual, I have always started at the furthest point from the master cylinder, seems to work best for me anyway you do not want huge pressure in the bleeder about 7-10 PSI is enough wheel nuts are 90 Lbs/Foot |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|