| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| S2 camshaft cover,sealant needed on corners? https://forums.tipec.net/viewtopic.php?f=25&t=18004 |
Page 1 of 1 |
| Author: | timmyturtle [ Mon Jun 23, 2014 9:25 pm ] |
| Post subject: | S2 camshaft cover,sealant needed on corners? |
As per title,do i need to put a bit of sealant in the corners? The gasket is new Thanks,Tim |
|
| Author: | Greggers [ Mon Jun 23, 2014 9:59 pm ] |
| Post subject: | Re: S2 camshaft cover,sealant needed on corners? |
FWIW ... I smeared Hylomar generously over the whole gasket, not just the corners... I figured it couldn't hurt! G |
|
| Author: | Waylander [ Tue Jun 24, 2014 10:16 am ] |
| Post subject: | Re: S2 camshaft cover,sealant needed on corners? |
just in the corners is all you need under the gasket a little black RTV or clear is good, no need to plaster the lot |
|
| Author: | RS2000CUSTOM [ Tue Jun 24, 2014 4:19 pm ] |
| Post subject: | Re: S2 camshaft cover,sealant needed on corners? |
Clean the head contact area and the groove the seal fits in Use no sealer and tighten in sequence from the middle out and I got no probs or oil leaks |
|
| Author: | Hallsy [ Tue Jun 24, 2014 5:36 pm ] |
| Post subject: | Re: S2 camshaft cover,sealant needed on corners? |
I used the same method as Dave above, but I do seem to remember that Porsche recommend adding RTV to the corners. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|