Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
any ideas what this is https://forums.tipec.net/viewtopic.php?f=25&t=17145 |
Page 1 of 1 |
Author: | lacedr [ Sat Mar 01, 2014 7:50 am ] |
Post subject: | any ideas what this is |
http://i278.photobucket.com/albums/kk85/lacedr/20140228_131158_zpsaxtnv9qj.jpg hi, i have just finished putting the turbo back in my car which is all good started and runs great so i am pleased,bbut i have the above bracket left over and cant remember where it goes. any ideas? cheers Dave |
Author: | JasonGibson [ Sat Mar 01, 2014 9:58 am ] |
Post subject: | Re: any ideas what this is |
![]() |
Author: | Hairyarse [ Sat Mar 01, 2014 11:35 am ] |
Post subject: | Re: any ideas what this is |
Looks to me like a bracket that goes under the inlet manifold. If you look at the E944-88 PET catalogue, it's page 70 of 417. It's part no 8; ![]() |
Author: | Richair [ Sat Mar 01, 2014 11:43 am ] |
Post subject: | Re: any ideas what this is |
^I agree with Andy on the above; it attaches at the front of the inlet at the top and somewhere on the block at the bottom. Due to the length of the manifold I'm afraid to say it's reasonably important. |
Author: | lacedr [ Sat Mar 01, 2014 12:07 pm ] |
Post subject: | Re: any ideas what this is |
Bugger Thanks for the replies, should have checked first before I bolted it all together. Cheers Dave |
Author: | t3rra [ Sat Mar 01, 2014 11:12 pm ] |
Post subject: | Re: any ideas what this is |
Just seen this, that is indeed the under the front off manifold helps susport it. Good work on the turbo |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |