Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
944 S2 Repair https://forums.tipec.net/viewtopic.php?f=25&t=17102 |
Page 28 of 36 |
Author: | pauly [ Tue Jul 26, 2022 10:38 am ] |
Post subject: | Re: 944 S2 Repair |
sgl1966 wrote: I will finish building it up and it can sit on the stand in case anything happens to the engine in the car . Simple swap and already have the map saved on the laptop . Same thing I've been doing for over 10 years then . |
Author: | sgl1966 [ Tue Jul 26, 2022 5:33 pm ] |
Post subject: | Re: 944 S2 Repair |
Yep , it’s a certain way to guarantee that nothing will go wrong with the engine in your car ! |
Author: | pauly [ Tue Jul 26, 2022 10:47 pm ] |
Post subject: | Re: 944 S2 Repair |
sgl1966 wrote: Yep , it’s a certain way to guarantee that nothing will go wrong with the engine in your car ! Plus newer stuff with awd and a DSG gearbox is easier to drive, and launch. |
Author: | sgl1966 [ Fri Jul 29, 2022 5:59 pm ] | ||
Post subject: | Re: 944 S2 Repair | ||
Genuine Rocking Horse Poo !!!
|
Author: | sgl1966 [ Fri Jul 29, 2022 6:12 pm ] |
Post subject: | Re: 944 S2 Repair |
I had been looking for quick racks for the 944 for a while and had come across PRS . If you look at their facebook page there is a video of a 944T doing a hillclimb with a 2.2 rack . Unfortunately that is not a porsche rack but one of their subaru items someone managed to fit . Then Mr TurboTim mentioned he had a few bits left over from selling his car including this porsche 944 2.4 rack . Apparently Sellholm in sweden make a new pinion and rack and put it all together for you if you give them lots of pennies . Anyway it arrived yesterday and is now on the car . I cant give a review yet as still waiting on some electronic components that must be on that slow boat from China ! |
Author: | sgl1966 [ Thu Aug 04, 2022 6:26 pm ] | ||
Post subject: | Re: 944 S2 Repair | ||
Electronic bits turned up . Reaching the limits of the outputs of this Vems ecu now . As I am running COP , these are using the stepper outputs from the Vems . The Jenvey throttle body has a built in 6 pin evo stepper icv but we have no way of running it now from the ecu . The simple solution is to connect up the OE Bosch 3 pin ICV but no , my clever mate reckons we can run the evo icv with the one output we have left . So we now have now have two little bits of electronics connected to the Vems , one to work the stepper motors and one to control it after you have written some basic code and downloaded it . It took most of the day but we now have control of the ICV through the ecu . As you can tell this is way over my head and I got bored with this after 15 minutes and just made the tea all day !
|
Author: | scam75 [ Thu Aug 04, 2022 9:43 pm ] |
Post subject: | Re: 944 S2 Repair |
Way beyond my capabilities too! All sounds great right enough!! |
Author: | sgl1966 [ Sun Sep 11, 2022 8:09 pm ] | |||
Post subject: | Re: 944 S2 Repair | |||
Lady luck smiles ! 944 in garage , and new M4 6ft from end of tree. Forgot to buy lottery ticket .
|
Author: | scam75 [ Mon Sep 12, 2022 11:09 am ] |
Post subject: | Re: 944 S2 Repair |
OMG! Lucky escape there, schoolboy error with the lottery tickets though!! Glad all is (mostly) ok. Stuart |
Author: | sgl1966 [ Mon Sep 12, 2022 5:38 pm ] |
Post subject: | Re: 944 S2 Repair |
Thanks Stuart, good luck with the op ! |
Author: | Waylander [ Tue Sep 13, 2022 5:26 pm ] |
Post subject: | Re: 944 S2 Repair |
dodged a bullet there, lucky escape |
Author: | scam75 [ Wed Sep 14, 2022 1:18 pm ] |
Post subject: | Re: 944 S2 Repair |
sgl1966 wrote: Thanks Stuart, good luck with the op ! Thanks, op was a big success, as are the lifters you kindly sent up, not a noise from them. Many thanks again! Stuart |
Author: | sgl1966 [ Wed Sep 28, 2022 2:56 pm ] |
Post subject: | Re: 944 S2 Repair |
Glad to hear Stuart . Still been having trouble with the stepper motor controllers , but believe we have found the reason why . The Mitsubishi icv requires a floating earth to work . I looked this up and am still unsure what this is , but fortunately my mate does and he’s wiring it . It does mean another wait for another electronic chip but I am sure it will be worth it to get this working correctly. |
Author: | sgl1966 [ Sun Oct 16, 2022 1:40 pm ] | |||
Post subject: | Re: 944 S2 Repair | |||
Hurrah , it has finally been sorted and have had the car at a decent idle . We have had to bring the fuelling down quite a bit which is to be expected running the same map with 300cc less and a slightly higher comp ratio . So all was good until it cut out and refused to start , fortunately this was a simple fix after some head scratching . Make sure there is petrol in the tank ! I have attached a photo of the unit and instructions in case any one else is in the same situation . This converts a pwm signal from the ecu so you are able to run a 4/6 wire stepper ICV . No programming or working out the motor steps and limits is needed , it does it all for you , then you can control it via the Vems . We had to do this as the stepper outputs from the original Vems are being used for the Cop's .
|
Author: | sgl1966 [ Wed Nov 30, 2022 12:36 pm ] | ||||
Post subject: | Re: 944 S2 Repair | ||||
Vems back with Peep , loose connection on back of ecu blew a chip . Wish my ecu got air miles !
|
Page 28 of 36 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |