Porsche Enthusiasts Club Forum
https://forums.tipec.net/

944 Turbo - Heater Fan not working speed position 1
https://forums.tipec.net/viewtopic.php?f=25&t=16822		 Page 1 of 1
Author:  DavidH944 [ Mon Jan 13, 2014 10:05 pm ]
Post subject:  944 Turbo - Heater Fan not working speed position 1
Just noticed the heater blower fan is not running on speed position 1, works fine for speed 2-4.

Before start taking things apart, anyone suggest what is most likely culprit to look at first?

Have disconnected/reconnected the electrical terminal connector on top of the heater unit to the loom, terminals were clean and clear of oxidation so not likely that.

Suggestions please.

Cheers
Author:  Rhett [ Mon Jan 13, 2014 11:17 pm ]
Post subject:  Re: 944 Turbo - Heater Fan not working speed position 1
Hi David,

Here is a link to a procedure for servicing the resistor pack in the heater. It may be useful?....Otherwise, you might just need to take it out and give it a visual and electrical check.

Many people have suggested that the pack is left in vinegar overnight to clean the various contacts, etc. However..I have never tried that. Of course the problem you are having may be the actual switch in the heater unit itself.

http://only944.com/upgrades/acblowerfix.html

If I think of anything else I will post it up. :D
Author:  Hairyarse [ Tue Jan 14, 2014 8:53 pm ]
Post subject:  Re: 944 Turbo - Heater Fan not working speed position 1
Wow great link, never seen that before! 8)
Author:  Llewelyn [ Tue Jan 14, 2014 8:55 pm ]
Post subject:  Re: 944 Turbo - Heater Fan not working speed position 1
I can confirm that soaking the resistor pack in vinegar does work... Try it!
Author:  frenchy [ Tue Jan 14, 2014 8:59 pm ]
Post subject:  Re: 944 Turbo - Heater Fan not working speed position 1
Suspect control knob ?
Author:  DavidH944 [ Tue Jan 14, 2014 11:01 pm ]
Post subject:  Re: 944 Turbo - Heater Fan not working speed position 1
Thanks for the suggestions and the excellent link, will start with the resistor pack which was wondering might be suspect and move onto the control knob if the vinegar treatment doesn't do the trick.

Will give it a try this weekend.

Cheers
Author:  AlexanderMMA [ Thu Jan 16, 2014 7:56 pm ]
Post subject:  Re: 944 Turbo - Heater Fan not working speed position 1
Great link thanks for posting! :)
Author:  Rhett [ Thu Jan 16, 2014 8:36 pm ]
Post subject:  Re: 944 Turbo - Heater Fan not working speed position 1
Llewelyn wrote:
I can confirm that soaking the resistor pack in vinegar does work... Try it!


Thanks for the confirmation - I had heard it might. Sounds like the kind of thing Aggie and Kim would suggest in that pinnacle of CH4's programming - 'How clean is your house?' - as everything they did seemed to involve vinegar! :lol:
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/