Porsche Enthusiasts Club Forum
https://forums.tipec.net/

924 carrera gt wheel spacers rear?
https://forums.tipec.net/viewtopic.php?f=25&t=16612		 Page 1 of 1
Author:  nicksonmsport [ Sun Dec 01, 2013 1:45 pm ]
Post subject:  924 carrera gt wheel spacers rear?
just looking into the wheels fitted to the cgt. it says the rears were 8x16 et10, plus wheel spacers? does anyone know what thickness spacers were used to get the correct wheel fitment?

there are also 9x16 et15 fuch wheels available, so depending on the spacers used on the 8j, the 9j wheel may be able to be used to avoid use of spacers.

the 9j wheels would only fit 7.5mm wider than the 8j wheels on the outside edge, but would be 20mm wider on the inside edge.
if I decided to go down the route im contemplating, the wider rear wheels would come in handy for maximum grip/traction.

many thanks
nick
Author:  944 Man [ Mon Dec 02, 2013 12:12 am ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
In all likelihood theyll be the same spacers and elongated studs later used on the series one 944.
Author:  Carrera RSR [ Mon Dec 02, 2013 10:40 am ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
Fronts usually 7x16 ET23.3, Rears 8x16 ET10. At a guess it may retain the stock turbo 21mm spacer, but didn't the CGT have ally trailing arms rather than turbos steel? Therefore slightly wider rear track?

CGT's with 8 or 9'' fronts and 9'' rears look the best, but more spendy!
Author:  grbspeedster [ Mon Dec 02, 2013 8:15 pm ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
Nick
Hi , we used the 16 X 9J 911 Turbo alloys when building my sons. No spacers and really fills the arches well :D
Attachment:
Rear1.jpg
Attachment:
Side2.jpg
Author:  nicksonmsport [ Mon Dec 02, 2013 8:57 pm ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
cheers! what size fronts?

also where did you source the kit from??

many thanks
nick
Author:  nsa [ Mon Dec 02, 2013 9:00 pm ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
The GT has steel trailing arms and 21mm spacers. 477 501 701 in the 924 PET.
Author:  grbspeedster [ Mon Dec 02, 2013 9:21 pm ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
Nick
fronts are 7J , we bought most of kit on a car that had been converted then stolen and vandalised(see this months mag for write up). However my son tracked down company in Birmingham who's owner has a CGT. He made cill covers and new rear bumper (its 10mm longer than standard car) I will ask him for company details

Ref NSA
you are correct real car has steel arms, never seen any advertised
Author:  944 Man [ Tue Dec 03, 2013 7:23 pm ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
Two options for panels are Pro-9 and Club Auto Sport, both in Birmingham. They wont fit very well though!
Author:  nicksonmsport [ Tue Dec 03, 2013 8:05 pm ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
if they are the only options then I will have to make them fit lol! not a lot else can be done!

I don't mind a bit of fettling!
Author:  944 Man [ Tue Dec 03, 2013 8:37 pm ]
Post subject:  Re: 924 carrera gt wheel spacers rear?
Id go for rears from a fellow called Marek at Teilecar. He does 944 front wings too (944s used a 937 pattern wing made of steel rather than PU), but I cant remember whether he only does 951 pattern or not. Anyway, his stuff will still need work, but its leagues ahead of the other GRP kit that Ive mentioned.

Id buy a bonnet off Pro-9 too (then fit a 937 scoop to it), but again, be ready with your bast*rd file...
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/