Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Does anyone have a crank breather hose for a 924?
https://forums.tipec.net/viewtopic.php?f=25&t=16428
Page 1 of 1

Author:  Althejazzman [ Sun Nov 03, 2013 3:02 pm ]
Post subject:  Does anyone have a crank breather hose for a 924?

This is the pipe that runs from in between the intake boots and down to the side of the block. It has a special restrictive bung in the middle. Mine became brittle and snapped off. As I understand it, this is common due to heat and pressure.

If anyone knows where I can buy one, or might have a spare, that would be very welcome.

Author:  Carrera RSR [ Sun Nov 03, 2013 3:13 pm ]
Post subject:  Re: Does anyone have a crank breather hose for a 924?

Have you tried your OPC? Are they available? A used one will be brittle as well

Author:  Althejazzman [ Sun Nov 03, 2013 4:43 pm ]
Post subject:  Re: Does anyone have a crank breather hose for a 924?

I will try an OPC. It's possible that someone might have a used one that is newer than the car.

Author:  Althejazzman [ Mon Nov 04, 2013 1:07 pm ]
Post subject:  Re: Does anyone have a crank breather hose for a 924?

Arghhh. NLA from Porsche.

Author:  Carrera RSR [ Mon Nov 04, 2013 1:13 pm ]
Post subject:  Re: Does anyone have a crank breather hose for a 924?

Several cars being broken in here http://www.porsche924.co.uk/forum/viewforum.php?f=12.

Author:  Althejazzman [ Mon Nov 04, 2013 6:47 pm ]
Post subject:  Re: Does anyone have a crank breather hose for a 924?

Thanks Steve. However Jon Mitchell is going to tell me how I can make one from ordinary oil hose. I'll report back here.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/