| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| rear arb bushes and drop links https://forums.tipec.net/viewtopic.php?f=25&t=16379 |
Page 1 of 1 |
| Author: | jonjeffryes [ Mon Oct 28, 2013 12:38 am ] |
| Post subject: | rear arb bushes and drop links |
In the process of trying to cure the rattle from the car i'm looking at replacing the rear Drop links and ARB mounting bushes. Hell these are expensive OEM from Porsche and specialists. I'm now looking at Powerflex bushes plus adjustable drop links on ebay which are Rosejointed. At under £70 per pair they seem good value. Has anyone any used these drop links and are they ok? thanks Jon |
|
| Author: | t3rra [ Mon Oct 28, 2013 2:33 pm ] |
| Post subject: | Re: rear arb bushes and drop links |
I had them on my S they go rusty quick. Don't no what there like to fit. Was going to put them On my turbo with 18mm rear bar but lost them Some how. So I went for stock with fresh rubber. Is the rear bar set up silghtly differnt on Pre 85.5 cars? To oval dash ones. I had full poly bushes and gaz gold on the S and it was a bit creaky. All went on at the same time so its hard to say what causes the noise. Fresh rubber will be better then worn Iv got a full lightly used poly bush set from 25.5 front bar and bar, and rear torsion bar carriers. Rear ploys I sold with the rear bar |
|
| Author: | jonjeffryes [ Mon Oct 28, 2013 7:29 pm ] |
| Post subject: | Re: rear arb bushes and drop links |
t3rra wrote: I had them on my S they go rusty quick. Don't no what there like to fit. Was going to put them On my turbo with 18mm rear bar but lost them Some how. So I went for stock with fresh rubber. Is the rear bar set up silghtly differnt on Pre 85.5 cars? To oval dash ones. I had full poly bushes and gaz gold on the S and it was a bit creaky. All went on at the same time so its hard to say what causes the noise. Fresh rubber will be better then worn Iv got a full lightly used poly bush set from 25.5 front bar and bar, and rear torsion bar carriers. Rear ploys I sold with the rear bar Hi Terry, Thanks for this. The e-bay offer have rubber boots so these packed with grease should make them last a bit longer. How much do you want for the front polys and bar? thanks Jon |
|
| Author: | t3rra [ Mon Oct 28, 2013 7:59 pm ] |
| Post subject: | Re: rear arb bushes and drop links |
They look the same, guess they revised the desgin. Sent you a pm Its 26.8 mm bar |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|