No but I will have the head
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Set of bent valves for a 2.7. Worth anything? https://forums.tipec.net/viewtopic.php?f=25&t=13828 |
Page 1 of 1 |
| Author: | daddyporka [ Sat Sep 15, 2012 2:14 pm ] |
| Post subject: | Set of bent valves for a 2.7. Worth anything? |
Hi. Just removed all 8 valves from the cylinder head of my engine which had a cam belt failure. Are they worth anything to someone?? Pm me please. Thanks |
|
| Author: | tr7v8 [ Sat Sep 15, 2012 5:59 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
daddyporka wrote: Hi. Just removed all 8 valves from the cylinder head of my engine which had a cam belt failure. Are they worth anything to someone?? Pm me please. Thanks Are they all bent? The unbent ones will have a market. I've straightened bent valves in the past & checked them with a V Block with a clock but I'm not sure I'd chance it on a Porsche. |
|
| Author: | jmgarage [ Sat Sep 15, 2012 6:04 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
No but I will have the head
|
|
| Author: | daddyporka [ Sat Sep 15, 2012 6:40 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
Yeah looks like all are bent. If anyone wants the head pm me but be quick as it will be on eBay tomorrow. Thanks. |
|
| Author: | pauly [ Sat Sep 15, 2012 7:32 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
jmgarage wrote: No but I will have the head Just how many 2.7 heads and 3.0 cranks have you got Jon ?. 
|
|
| Author: | jmgarage [ Sat Sep 15, 2012 8:19 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
Trying to corner the market on them! Lots comming up at the moment, but you just know one day there will be hard to find |
|
| Author: | pauly [ Sat Sep 15, 2012 9:15 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
jmgarage wrote: Trying to corner the market on them! Lots comming up at the moment, but you just know one day there will be hard to find  I googled 3.0 turbo and found one of my posts looking for a 2.7 head from 2009  , admitedly I wasn't going out of my way to get one back then but it seems harder to source one now. I just need a good 3.0 crank and that's the hard bit's sorted  . Though it would be sad to see people buying sound 2.7 944's pulling the engine and scrapping the rest.
|
|
| Author: | jmgarage [ Sat Sep 15, 2012 10:37 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
We have not found it too hard this year, but to be honest I think people such as the breakers yards and individuals know we buy them, so they tend to call us, so maybe they are just finding me. |
|
| Author: | pauly [ Sat Sep 15, 2012 10:49 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
jmgarage wrote: We have not found it too hard this year, but to be honest I think people such as the breakers yards and individuals know we buy them, so they tend to call us, so maybe they are just finding me. Maybe though you did say recently you were buying the whole car to get the engine. 968 short engines seem rarer than 2.7 heads. |
|
| Author: | jmgarage [ Sat Sep 15, 2012 11:08 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
Oh absolutely, we have a 944 2.7 auto we bought earlier this year and it was absolutely mint. We paid £400 for it, the owner insisted that it was destroyed if he sold it to us, because he found when he tried to sell it that it was a category C right off.. We tried to explain that this was not the end of the world, but he was sure he wanted the car destroyed.. So we bought it. If it was a 2.5 lux we would not have been interested at £400, simply because we do not have any call for the parts (or rarely), but we knew the car would pay for itself with what we could sell, and leave us with a 3.0 block and 2.7 head for free, so thats why we bought it. Having said that, I would pay for a 2.7 head, a 2.7/3.0 block, and a 3.0 crank, and on balance we would buy a scrap 2.7 if it came up again for the same money. 2.7 lux 944's come up on ebay from time to time without an MOT or with a blown gearbox or even engine, if the price is right we would buy one for what we need, but I would probably stop short of buying a £1500 to £2000 2.7 lux just for the head or block. To be honest though, when you think that putting a 3.0 into a 944 turbo is kind of taking the car away from being a 944 turbo anymore, and if you are changing the brakes and suspension, along with fitting an aftermarket LSD and getting the bodywork perfect.. It does make it viable to buy a 2.7 lux and turn the whole car into a 3.0 turbo by adding turbo wings, front bumper and rear diffuser... To be honest, lots of people with 3.0 turbos upgrade all the turbo specific bits in the rest of the car anyway, so a really mint 2.7 may be a viable project car. |
|
| Author: | pauly [ Sun Sep 16, 2012 1:35 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
Yes and when I see a good S2 go for peanuts I often think it would make a good base for a 3.0 turbo. Whatever you start with though it's not going to be cheap and I wonder how many people are still willing to spend big on a 944 when they could just buy a Monaro or RS Audi. |
|
| Author: | jmgarage [ Mon Sep 17, 2012 12:13 am ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
What we find is the people who spend big on 944's have a pretty limitless budget. There seems to be a new kind of modified 944 turbo owner out there, sometimes with hundreds of thousands of pounds worth of cars in their collections. I think part of it is there is a certain demographic, where people were at a formative age in the 80's and 90's and had someone in their life who had a 944 or 944 turbo who they looked up to.. it could have been their boss, an uncle who knows, but it seems that in later life when this person had "made it" in life, they want that same car, but realise that time has marched on and an amazing power figure in the 80's is not so amazing now... So they want the performance to be increased to give them the "wow factor" they craved in the 80's when they didnt have the money to own the car back then. The other kind of customer we are finding for this kind of car is someone who has quite new GT3's and GT2's that have come in for work, and enquired about "Those funny 944 Porsche things", we have explained how they can be tuned, they have done their own research and come back asking us to build one. You would think that these kinds of people would be on the forums and part of the community, but there are some people with truly amazing 944's that are completely out of the loop community wise, and some are quite public figures who you would be amazed to learn have a tuned 944 turbo. It is not just confined to the 944 market though... A local Rolls Royce dealer I know has a MK2 escort that he has spent tens of thousands of pounds on building the car he wanted in the 80's but could not afford to build back then.. this car has an original BDA engine that alone in worth thousands of pounds, a car where the shell prep, suspension, driveline have all cost him thousands, he may even have spent as much as it costs to prepare a world rally car in building his version of a 1970's rally car out of which was at one point a 1100cc shopping car from the 70's. Its a funny old business |
|
| Author: | pauly [ Mon Sep 17, 2012 12:50 pm ] |
| Post subject: | Re: Set of bent valves for a 2.7. Worth anything? |
Back in the 80's I bought and sold a few MK 1 and 2 RS Escorts, 3.0/2.8 Capri's and Stags, lost money on every one of course . I had loads of them, now decent ones are big bucks but the novelty wore off for me. Turbo's were for rich boys back then and didn't think I could afford to run one, compare a £20k Escort and a £10k turbo today and there really isn't much comparison.
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|