Porsche Enthusiasts Club Forum

I have just been clearing out my shed and discovered four brembo 4 pot calipers with steel hoses.
I bought these off a guy in Canada several yaers ago with th intention of fitting them on my 944,
started to refirb them then got side tracked and forgot all about them.
If there is anyone out there who want's them come and get them they are free to the first person to collect.
They cost me £300 but without a 944 to fit them to they are no good to me.
Call me on 01903 246179 must go this weekend.
There is also a LHD 944 throttle cable.
Please if you want them please use them and dont sell them on.

Parts gone

See you later Roger!

Jim
Are you going to put those on your lux? I have a set of brembo brakes in my garage (From an S2), do they need different hubs and discs or just discs?

Hi again
Any lefties out there I have found a brand new throttle cable for a 944 any one want it I will post this as it's quite
small. See picture

Roger.

Yes I am but I cheated as my Lux has S2 corners already.
For the rear you just need discs, callipers & hoses. For the front you need the complete hub, upright & disc. I think the hoses are different as well. The strut is the same for both set ups so could stay but mine swapped the whole front corners, except wishbone (which is the same anyway).
This is only for Post ABS cars late 86 on.
My Lux has an S2 front PU, rear spoiler, brakes & hubs. SO when it gets an S2 engine will be even more schisophrenic<sp>