| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| immobiliser stuck on https://forums.tipec.net/viewtopic.php?f=25&t=12760 |
Page 1 of 1 |
| Author: | rapidstu [ Sat Apr 14, 2012 10:49 am ] |
| Post subject: | immobiliser stuck on |
while converting my 944s2 into a track car i have stripped out every thing i can to save weight, even trimming the wiring harness down after removing things like roof motor, rear wiper, window motors etc but i have done some thing to activate the original imobiliser, tried stripping all alarm parts out but i still have a relay ticking away in the alarm module. ( car turns over but no spark) Does any one know how to bypass the alarm module? thanks |
|
| Author: | tr7v8 [ Sat Apr 14, 2012 2:05 pm ] |
| Post subject: | Re: immobiliser stuck on |
Details are on Clarkes or Pelicans website. If you can't find it ping me a PM & I have a copy buried on here somewhere. |
|
| Author: | rapidstu [ Sat Apr 14, 2012 5:03 pm ] |
| Post subject: | Re: immobiliser stuck on |
Many thanks jim, i have removed the dash and found 2 ignition switch wires had been cut and additional wires added, which now dont go anywhere. i am going to rejoin the wires back to original and see what happens. play stopped because of rain. Attachment: phpz7t0HTAM.jpg Attachment: new1.jpg
|
|
| Author: | peanut [ Mon Apr 16, 2012 1:05 pm ] |
| Post subject: | Re: immobiliser stuck on |
if you have 12v+ on terminal 30 of your DME relay socket with ignition off you should at least be able to get it started with a 3xway bypass cable i should have thought. if you remove the DME relay and link terminals 30 and 87 and 87b together it will feed 12v+ to the ECU , fuel pump, injectors, and ignition circuit (via the ECU) Are you sure that the chattering relay isn't due to dodgy earthing on your door courtesy light switches ? they are linked into the alarm circuit. If you need any help troubleshooting the fuel injection and ignition systems and bypassing your immobilier you're welcome to pm me |
|
| Author: | rapidstu [ Thu May 24, 2012 6:33 pm ] |
| Post subject: | Re: immobiliser stuck on |
many thanks peanut, modified the dme and it started first turn, chattering relay gone. the fuel pump seems to be on all the time but a switch will cure that. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|