Porsche Enthusiasts Club Forum
https://forums.tipec.net/

924S Sill Finish
https://forums.tipec.net/viewtopic.php?f=25&t=12559		 Page 1 of 1
Author:  theorangeperil [ Mon Mar 19, 2012 10:03 am ]
Post subject:  924S Sill Finish
I'm wanting to give the sills on my 86 a quick refinish. No rust work required, just the colour has gone patchy. It looks like a matt dark grey stonechip type finish. Is it Wurth SKS Stoneguard paint? Any help greatly appreciated!

Peter
'86 924S
'69 911T
'04 911 Anniversary
Author:  944bob [ Mon Mar 19, 2012 5:24 pm ]
Post subject:  Re: 924S Sill Finish
I used black Wurth Stoneguard and, when dry, over sprayed in grey cellulose primer and red cellulose topcoat. -good result :D
Author:  theorangeperil [ Mon Mar 19, 2012 7:09 pm ]
Post subject:  Re: 924S Sill Finish
Thanks Bob. As it's a 924S they don't have body coloured lower sills, it's a dark grey or black kind of stone chip finish. I'm keen to keep the factory look... 8)
Author:  John W [ Mon Mar 19, 2012 7:40 pm ]
Post subject:  Re: 924S Sill Finish
Black Waxoyl underseal on mine. Otherwise, use a black/grey paint to suit.
No need to get too anal about it. Not too many people notice........ :wink:
Author:  theorangeperil [ Mon Mar 19, 2012 9:03 pm ]
Post subject:  Re: 924S Sill Finish
Thanks John.
Whoops, I guess I'm must be spending too much time on the early 911 forums! :wink:
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/