| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Which manufacturers do struts/dampers for the 924? https://forums.tipec.net/viewtopic.php?f=25&t=12547 |
Page 1 of 1 |
| Author: | Chris71 [ Fri Mar 16, 2012 2:19 pm ] |
| Post subject: | Which manufacturers do struts/dampers for the 924? |
I'm trying to work out which manufacturers supplied front struts and dampers for the 924. Am I right in thinking standard fitment was Boge? |
|
| Author: | Carrera RSR [ Fri Mar 16, 2012 7:18 pm ] |
| Post subject: | Re: Which manufacturers do struts/dampers for the 924? |
PET list Koni for 924 and turbo, Bilstein for Carrera GT. |
|
| Author: | Chris71 [ Sat Mar 17, 2012 10:39 am ] |
| Post subject: | Re: Which manufacturers do struts/dampers for the 924? |
For reasons which are slightly convoluted I need to know if Boge struts will fit on a 1983 car.  The Haynes manual lists the struts as: "Boge or Koni (Koni standard 1980 - onwards)" Does that mean the Boge struts will still fit on a post-1980 car? I'm guessing so... |
|
| Author: | eurocliff [ Sun Mar 18, 2012 9:26 am ] |
| Post subject: | Re: Which manufacturers do struts/dampers for the 924? |
There were several 'manufacturers' used for the front struts on the 924. two have already been mentioned: Boge and Koni, the third was Fechtal and Sachs. Now Sachs. |
|
| Author: | Chris71 [ Sun Mar 18, 2012 9:57 am ] |
| Post subject: | Re: Which manufacturers do struts/dampers for the 924? |
Hi cliff, Any idea if they're interchangeable? To be blunt, I might be able to get a good deal on some Boge struts through work, but I need to make sure they'll fit my '83 car. Chris ETA: And it appears they do. Spoke to a friend of a friend who works at Autofarm and it seems the Boge part number is listed for the full duration of the production run. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|