sorry No idea
but please make sure you have photo's .....before....during.....and after so I can copy
We will be expecting a "how to thread"
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Throttle Body Cleaning https://forums.tipec.net/viewtopic.php?f=25&t=12304 |
Page 1 of 1 |
| Author: | Richy_S [ Sat Feb 04, 2012 8:16 pm ] |
| Post subject: | Throttle Body Cleaning |
On my last car i stripped it and shot blasted the throttle body. Any good tips on how to clean it so it matches my nice shiny manifold without stripping it. Its off the car. Rich |
|
| Author: | kongsodoken [ Sat Feb 04, 2012 8:32 pm ] |
| Post subject: | Re: Throttle Body Cleaning |
sorry No idea but please make sure you have photo's .....before....during.....and after so I can copy We will be expecting a "how to thread"
|
|
| Author: | A9XXC [ Sat Feb 04, 2012 11:30 pm ] |
| Post subject: | Re: Throttle Body Cleaning |
Watching with interest...... |
|
| Author: | bertelli_1 [ Sun Feb 05, 2012 9:01 am ] |
| Post subject: | Re: Throttle Body Cleaning |
You chose a nice fiddly part to detail! I'd use some truckwash to remove any loose dirt & grease, then maybe some alloy wheel cleaner. And a toothbrush - top tip, don't use your own. Just be careful around the seals and bearings. |
|
| Author: | DaveM [ Sun Feb 05, 2012 10:29 am ] |
| Post subject: | Re: Throttle Body Cleaning |
I used to clean carbs with petrol and a tooth brush and they always come up nice and clean. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|