Or you can look here, I had to replace mine and used this guide:
http://www.clarks-garage.com/
Very helpful!
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 944 S2 RADIATOR REMOVAL https://forums.tipec.net/viewtopic.php?f=25&t=12161 |
Page 1 of 1 |
| Author: | TOWER4POWER [ Mon Jan 09, 2012 2:11 pm ] |
| Post subject: | 944 S2 RADIATOR REMOVAL |
Hi Guys Does anyone know if there is a written procedure that i can print off for removing my radiator on my 1991 944 S2. I have a very small hole at the bottom of the radiator so i thought i would remove it and take it to one of the specialists to have a look at it for me. The car is off the road for the winter at the moment so a good time to get these jobs done. Kind Regards Tony |
|
| Author: | bertelli_1 [ Mon Jan 09, 2012 6:24 pm ] |
| Post subject: | Re: 944 S2 RADIATOR REMOVAL |
I haven't seen an online guide but its not tricky. Get the car on stands, remove undertray, drain coolant via the blue screw on the radiator. Remove the 6 screws holding the fan assembly on (3 top, 3 bottom) & the 2 elec connectors. Take the fans out the bottom. Undo the top & bottom hoses, expansion tank hose & rad fan switch wires. At the top slacken off the 2 top bolts (10mm head with a 13mm locknut) & tilt the rad towards the engine. Lift it over the bottom rubber mounts & drop out the bottom. Job done! You may want to remove the hose on the waterpump union to give yourself a bit more room & dont get the undertray & fan bolts mixed up!!!! The fan ones are special stubby ones - using the standard length will puncture the rad! The turbo procedure is a bit more involved. |
|
| Author: | KatPorsche [ Mon Jan 09, 2012 6:38 pm ] |
| Post subject: | Re: 944 S2 RADIATOR REMOVAL |
Or you can look here, I had to replace mine and used this guide: http://www.clarks-garage.com/ Very helpful!
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|