Porsche Enthusiasts Club Forum
https://forums.tipec.net/

944 Wheel size
https://forums.tipec.net/viewtopic.php?f=25&t=1195
Page 1 of 1

Author:  Saxrom [ Mon May 19, 2008 6:24 pm ]
Post subject:  944 Wheel size

Anybody know the largest wheel size i can fit to a 944S2 cabrio

Author:  tr7v8 [ Mon May 19, 2008 6:39 pm ]
Post subject:  Re: 944 Wheel size

Technically 18 x 10 on the rear, certainly on an s2 Coupe, even they're iffy with some cars & wheel offsets.

Author:  Sean Smallman [ Mon May 19, 2008 7:16 pm ]
Post subject:  Re: 944 Wheel size

I had 10 x 18 on rear, 8 x 18 on fronts.

Author:  tr7v8 [ Mon May 19, 2008 7:28 pm ]
Post subject:  Re: 944 Wheel size

Sean Smallman wrote:
I had 10 x 18 on rear, 8 x 18 on fronts.

Operative word there is HAD

Author:  Sean Smallman [ Mon May 19, 2008 7:52 pm ]
Post subject:  Re: 944 Wheel size

You're absolutely right Jim, the old girl handles a lot better on stock size wheels.

Unless you can't live with the dated D90's and are happy to compromise the ride and road holding then by all means change the wheels.

Author:  cytefx [ Mon May 19, 2008 8:12 pm ]
Post subject:  Re: 944 Wheel size

when I got mine it had 9.5x17 on the rear and 8x17 on the front, but they were the wrong offset so i swapped them for the correct offset, and slightly smaller size (in width, same size tyres), but they were the correct offsets and it behaves better, although I think the wrong offsets had more to do with it than the sizes.

Ps if anybody want them they are for sale (the old rims, perfect for the later 944) :D

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/