Try turning the the filler cap through 90 degrees and see if that makes a difference.
When I had the cabby the flap wasn't flush if the filler cap was in the wrong position.
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Fuel filler cap - wont shunt flush with the body https://forums.tipec.net/viewtopic.php?f=25&t=10812 |
Page 1 of 1 |
| Author: | rav [ Tue Apr 12, 2011 8:03 pm ] |
| Post subject: | Fuel filler cap - wont shunt flush with the body |
I am working from home this week and the 944 is getting some attention during my breaks between meetings. My fuel filler cap will not shut flush with the body of the car. Pictures tomorrow as its dark now. Has anyone sucessfully managed to bend a plastic fuel filler cap back into place? Or perhaps someone has a Zermatt silver cap spare? |
|
| Author: | Sean Smallman [ Tue Apr 12, 2011 8:20 pm ] |
| Post subject: | Re: Fuel filler cap - wont shunt flush with the body |
Try turning the the filler cap through 90 degrees and see if that makes a difference. When I had the cabby the flap wasn't flush if the filler cap was in the wrong position.
|
|
| Author: | rav [ Wed Apr 13, 2011 7:34 am ] |
| Post subject: | Re: Fuel filler cap - wont shunt flush with the body |
Good point Sean. I will give this a go this morning once my meetings finish 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|