Porsche Enthusiasts Club Forum
https://forums.tipec.net/

An idiot Mistake
https://forums.tipec.net/viewtopic.php?f=25&t=10702		 Page 1 of 1
Author:  RH944 [ Sat Mar 26, 2011 8:46 am ]
Post subject:  An idiot Mistake
Trying to get the car back on the road after a period of in-activity.
Needed to sort a couple of problems for the MOT and started yesterday morning before work.
While attempting to change the speed reference sensors, I managed to drop the nut back into the sensor hole. Looks to be a bastard to get out but the housing might be easier to remove.
Anyone got any experience of getting the housing off?

Secondly, I need to change the temperature sensor at the front of the engine block. Anyone know a simple route into get the part changed?

I did manage to change battery :?

If I can get it sorted and no new issues, MOT is next weekend
Author:  Porsche952 [ Sat Mar 26, 2011 10:38 am ]
Post subject:  Re: An idiot Mistake
Have you tried a magnet , like the ones on the end of an ariel, you never know, it be worth try before you go tearing parts off ?? :?
Author:  Lee 944 [ Sat Mar 26, 2011 11:24 am ]
Post subject:  Re: An idiot Mistake
Good idea. Of course I've never done anything like that before (liar), which is why I had a magnet in a piece of string. I then invested in a small one on a goose neck. I think I got it out of Screwfix or somewhere?
Author:  westcoastjonny [ Sat Mar 26, 2011 12:45 pm ]
Post subject:  Re: An idiot Mistake
Pickup up a telescopic pen size (when not extended) magnet from Halfrauds or similar and it's the best purchase I ever made!
Author:  RH944 [ Sat Mar 26, 2011 2:13 pm ]
Post subject:  Re: An idiot Mistake
Unfortunately the bolt is lost out of site. Tried a magnet retreiver but no success.
Spoke to Jon Mitchell who say to remove the starter motor and turn the egine to encourage the bolt down to the bottom of the overall housing.
Must admit, I'm losing patience with the car :(

Maybe a days rest will encourage me to try the advice
Author:  tr7v8 [ Sat Mar 26, 2011 5:38 pm ]
Post subject:  Re: An idiot Mistake
Yup starter off would be my thought as well. The sender housings break so be careful as they are massively expensive.
Author:  RH944 [ Sat Apr 02, 2011 10:42 am ]
Post subject:  Re: An idiot Mistake
Thanks to help from a local TIPEC member, we found the bolt when we took the starter motor off.
Safely changed the speed sensors and all running sweet.

booked for MOT next weekend. Time to wash it and start using it to keep everything in better condition.

Thanks for the help.
Author:  sdelasal [ Tue Apr 05, 2011 9:17 pm ]
Post subject:  Re: An idiot Mistake
richard - I'm just wondering what were the symptoms that made you decide to change the speed sensors on the engine? Steve
Author:  RH944 [ Wed Apr 06, 2011 10:20 am ]
Post subject:  Re: An idiot Mistake
sdelasal wrote:
richard - I'm just wondering what were the symptoms that made you decide to change the speed sensors on the engine? Steve



I would get a problem with the car refusing to start. First time it happened, the AA man (a very nice man :? ) took the sensors out and cleaned them and everything was fine. He had already checked the electrics back from spark plug and distributor.
Whenever i've had the same starting problem since, it has jus been a case of removing a sensor, quick clean and bolt back in place. I have been meaning to change them for a while and this seems to have cured the problem. Fingers crossed.

I't's a topic that has come up regularly on the forum. Type in speed sensors as a search
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/