Porsche Enthusiasts Club Forum
https://forums.tipec.net/

RUST what RUST
https://forums.tipec.net/viewtopic.php?f=25&t=10530
Page 1 of 1

Author:  kongsodoken [ Sat Feb 26, 2011 7:32 pm ]
Post subject:  RUST what RUST

Took my 944 to JR Classics in south Yorkshire, I have to say very pleasent company to deal with and they did a great job have got quotes around the £600 mark it was great the JR came in almost half this amount :bounce: , after removing all the trim they cleaned and wire brushed the underside and then the applied primmer/converter, followed by multiple coats of dinitrol, all box sections and cavities doors etc were injected with waxoyl......comes with a 3 year corrosion guarantee...they had the car for 3 days some photo's of the process bellow :D

Author:  kongsodoken [ Sat Feb 26, 2011 7:35 pm ]
Post subject:  Re: RUST what RUST

primer and converter !

Author:  kongsodoken [ Sat Feb 26, 2011 7:38 pm ]
Post subject:  Re: RUST what RUST

more pictures

Author:  kongsodoken [ Sat Feb 26, 2011 7:43 pm ]
Post subject:  Re: RUST what RUST

more primer going on

Author:  kongsodoken [ Sat Feb 26, 2011 8:05 pm ]
Post subject:  Re: RUST what RUST

nearly finished they added stone chip paint to the rear edge of the rear wing, this area seems to become very pitted

Author:  kongsodoken [ Sat Feb 26, 2011 8:08 pm ]
Post subject:  Re: RUST what RUST

did I mention that parking is not one of my best skills :lol:

Author:  Hairyarse [ Sat Feb 26, 2011 10:50 pm ]
Post subject:  Re: RUST what RUST

Nice job, seems a good price too

Author:  EDDIE [ Sun Feb 27, 2011 10:53 am ]
Post subject:  Re: RUST what RUST

I was able to see JR Classics in action when I took the seats back after refurbising them for Ken and I can confirm they do a very thorough job.

Nick :D

Author:  kongsodoken [ Sun Feb 27, 2011 11:28 am ]
Post subject:  Re: RUST what RUST

Thanks Nick
I am very happy with both the rust treatment and the seats :D

Author:  J.J. [ Sun Feb 27, 2011 5:02 pm ]
Post subject:  Re: RUST what RUST

Looks very good. Would consider that for mine. :)

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/