Yes the chrome tip is replaceable. You can get them from Porscheshop. I really should replace mine, it's been rusty since I've owned the car. (6 years)
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| New Back Box https://forums.tipec.net/viewtopic.php?f=25&t=1040 |
Page 1 of 1 |
| Author: | Spencer 77 [ Sat Apr 19, 2008 5:32 pm ] |
| Post subject: | New Back Box |
Hi All, I'm looking for new stainless steel back box for my S2. Don't want nothing that's too loud so i can't go on track days and would like one that has the same ( ish ) shape and size tail pipe as the original. Any suggestions? Spencer |
|
| Author: | 944BLOKE [ Sat Apr 19, 2008 8:42 pm ] |
| Post subject: | Re: New Back Box |
have a look at "type911" they seemto have some well priced exhausts. |
|
| Author: | Porsche [ Sun Apr 20, 2008 10:27 am ] |
| Post subject: | Re: New Back Box |
Do you want a new one because your old one's knackered or because you want more performance? I ask this beacuse, if you want it to look and sound much like the original, why have a stainless one, when the genuine Porsche box is most probably much lighter and last a very long time? Mine's been on for 18 years now & is still solid. (It could do with a new trim though.) |
|
| Author: | Spencer 77 [ Sun Apr 20, 2008 5:17 pm ] |
| Post subject: | Re: New Back Box |
The exhaust is fine apart from the tip...... is this replaceable? I did have a look but couldn't see how the tip comes off!!!!!!!!!! Also just before the tip there is some rotting of what appears to be maybe a heat sink or similar which has completely rotted......... Or am i just being stupid? Spen |
|
| Author: | Porsche [ Sun Apr 20, 2008 9:01 pm ] |
| Post subject: | Re: New Back Box |
Yes the chrome tip is replaceable. You can get them from Porscheshop. I really should replace mine, it's been rusty since I've owned the car. (6 years)
|
|
| Author: | Spencer 77 [ Mon Apr 21, 2008 10:48 am ] |
| Post subject: | Re: New Back Box |
How do the tips come off? I had a go at it but didn't want to use too much force in case i damaged the exhaust...... or do i just need to be a bit more brutal with it? Spen |
|
| Author: | richsimp1 [ Mon Apr 21, 2008 5:50 pm ] |
| Post subject: | Re: New Back Box |
I think its held on by sprung clips. Try giving it a bit of wellie! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|