| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Wonky back end https://forums.tipec.net/viewtopic.php?f=25&t=10098 |
Page 1 of 1 |
| Author: | c928jon [ Mon Dec 20, 2010 7:44 pm ] |
| Post subject: | Wonky back end |
I've finished the engine swap and am all done up front, so on to the suspension now! The back end of the car looks like its leaning over on the passanger side. If I measure wheel centre to wheel arch they are within 10mm each side, but it looks so wrong. I'm just about to rebush the rear suspension, is there anything I should be lookin for? The car was pretty messed about with when I got it, so could be anything. |
|
| Author: | lindsayhbrown [ Mon Dec 20, 2010 8:16 pm ] |
| Post subject: | Re: Wonky back end |
Probably needs the torsion bars re-indexing |
|
| Author: | c928jon [ Tue Dec 21, 2010 8:23 am ] |
| Post subject: | Re: Wonky back end |
I had a horrible feeling that was coming my way! |
|
| Author: | Richy_S [ Tue Dec 21, 2010 6:29 pm ] |
| Post subject: | Re: Wonky back end |
If its only 10mm you should be able to level that out with the eccentrics. Rich |
|
| Author: | lindsayhbrown [ Tue Dec 21, 2010 11:01 pm ] |
| Post subject: | Re: Wonky back end |
Richy_S wrote: If its only 10mm you should be able to level that out with the eccentrics. Rich If you can get them undone !! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|