No build yet. I recently moved house, and bought a Ducati. So I've been a bit preoccupied.
| Attachments: |
|
1299.jpg [ 164.36 KiB | Viewed 6659 times ] |
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Alternator Charging Harness https://forums.tipec.net/viewtopic.php?f=25&t=24797 |
Page 2 of 3 |
| Author: | pauly [ Thu Jul 08, 2021 1:32 am ] | ||
| Post subject: | Re: Alternator Charging Harness | ||
No build yet. I recently moved house, and bought a Ducati. So I've been a bit preoccupied.
|
|||
| Author: | Waylander [ Fri Jul 09, 2021 6:59 pm ] |
| Post subject: | Re: Alternator Charging Harness |
Anyone want a new one, for your 968 get in touch |
|
| Author: | pauly [ Fri Jul 09, 2021 11:23 pm ] |
| Post subject: | Re: Alternator Charging Harness |
sgl1966 wrote: Pauly how are you getting on with those pistons , 10 thou above block deck height ? 10 thou not an issue is it? |
|
| Author: | sgl1966 [ Mon Jul 12, 2021 7:33 pm ] |
| Post subject: | Re: Alternator Charging Harness |
Hi Waylander , would you do others with the higher rated insulation and could you give an idea of cost please . Pauly I'll pm you . |
|
| Author: | Waylander [ Mon Jul 12, 2021 11:38 pm ] |
| Post subject: | Re: Alternator Charging Harness |
Yes I can, but for a 944 I will need a pattern to follow, I only have a 968 cable currently, with 500 degree insulation I recon £75, if that’s not outrageous, I have spent a fortune on tooling and plugs |
|
| Author: | sgl1966 [ Tue Jul 13, 2021 12:58 pm ] |
| Post subject: | Re: Alternator Charging Harness |
Thanks Martin , I believe I have a 944 one in a 'spares' box , I will dig it out in the next couple of days and get back to you . |
|
| Author: | pauly [ Tue Jul 13, 2021 2:48 pm ] |
| Post subject: | Re: Alternator Charging Harness |
sgl1966 wrote: Pauly I'll pm you . pm returned. |
|
| Author: | sgl1966 [ Tue Jul 13, 2021 10:12 pm ] |
| Post subject: | Re: Alternator Charging Harness |
Found it ! Could you pm an address and I can get this sent to you , £75 sounds very reasonable Martin . Thanks simon |
|
| Author: | Waylander [ Thu Jul 15, 2021 11:33 am ] |
| Post subject: | Re: Alternator Charging Harness |
thanks for the cable I have most of the parts in stock now but not the plug housings yet I will get it all made except for the loom connector, I can just clip that on when it arrives |
|
| Author: | pauly [ Thu Jul 15, 2021 2:18 pm ] |
| Post subject: | Re: Alternator Charging Harness |
Ever considered making various part looms like Lindsey, or even full looms for "friends" Waylander? |
|
| Author: | Waylander [ Thu Jul 15, 2021 3:58 pm ] |
| Post subject: | Re: Alternator Charging Harness |
what a full car loom, what a huge undertaking that would be, the peg jigs all the cable and plugs grommets and terminals, god no, you have Autosparks for that kind of work, what do lindsey make, or more to the point buy in from a harness maker |
|
| Author: | pauly [ Thu Jul 15, 2021 10:01 pm ] |
| Post subject: | Re: Alternator Charging Harness |
You're right, I should have said engine bay/lighting. Lindsey sell various engine harnesses, up to what they call a full engine control harness for $500, probably £500 by the time it landed here. Pics of all the harnesses they sell are on their website. |
|
| Author: | Waylander [ Fri Jul 16, 2021 9:18 pm ] |
| Post subject: | Re: Alternator Charging Harness |
Yes I had a quick look, they look easy enough to make, the problem is not the junior timer plugs, but it’s the ecu plug pins, they have to be bought by the 1000, the plugs for the charging harness I really struggled to find somewhere to buy them, in less than 12,000 minimum order most required, I still had to buy quite a large number, most of which will end up in the recycling |
|
| Author: | pauly [ Sun Jul 18, 2021 12:24 am ] |
| Post subject: | Re: Alternator Charging Harness |
Jeez. I've got the harness that came with a 944 2.7 engine I bought years ago. I'll dig it out sometime and see how it compares to my turbo harness. May be useful for a template. |
|
| Author: | Waylander [ Thu Jul 22, 2021 9:47 am ] |
| Post subject: | Re: Alternator Charging Harness |
here you go Left 120-150°C Open Braid, Right Silicone coated Rated to 500°C  The Kit 
|
|
| Page 2 of 3 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|