Porsche Enthusiasts Club Forum

Hi all, just fitted a new screen to digital clock.. I have pressed one of the three buttons and the numbers digits are flashing in what looks like a 'test mode'. Does anyone have instructions on how to change time or even set the time and what each button is for?

it is probably either stuck in the stopwatch mode (in which case press button no.3) or the connectors to the screen have not been put on straight (when I did mine this was quite a tricky thing to get right, and with the clock half diassembled it took me a few goes until the characters displayed correctly.

From my vague recollection (Google is your friend here) the buttons do the following:

Clock:
No.3 changes to the stopwatch mode
1 & 2 (from memory) allow you to change the clock's time with all three buttons adjusting the time and whether you want the clock to display in a 12 or 24Hr format.

Stopwatch:
1- Starts/stops the stopwatch
2- resets the watch back to 0
3- Goes back to the clock.

Many thanks, I used the instructions to set the time which bizarrely came up fine when going up the hours and mins in a clear digit so it works! I think when I mentioned that things were flashing.. It was the stopwatch..