| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| flywheel lock for 944 S2 https://forums.tipec.net/viewtopic.php?f=24&t=8501 |
Page 1 of 1 |
| Author: | simmor12 [ Fri May 07, 2010 4:16 pm ] |
| Post subject: | flywheel lock for 944 S2 |
Hello I am after a flywheel Lock(P9206) or alternative,for my 944S2 to change the water pump and belts as the water pump is noisey. Does any body know if you need the tensioner(P9201) or is there an alternative you can use for replacing the belts, I have always owned classic cars, but always wanted a 944 as I had a picture of one on my bedroom wall when I was a lot younger. I have had the car for 6 Months and it is brilliant to drive and always puts a smile on my face when driving it. Any infomation would be much appreciated. cheers Simmor12 |
|
| Author: | tr7v8 [ Fri May 07, 2010 4:45 pm ] |
| Post subject: | Re: flywheel lock for 944 S2 |
simmor12 wrote: Hello I am after a flywheel Lock(P9206) or alternative,for my 944S2 to change the water pump and belts as the water pump is noisey. Does any body know if you need the tensioner(P9201) or is there an alternative you can use for replacing the belts, I have always owned classic cars, but always wanted a 944 as I had a picture of one on my bedroom wall when I was a lot younger. I have had the car for 6 Months and it is brilliant to drive and always puts a smile on my face when driving it. Any infomation would be much appreciated. cheers Simmor12 Most people either buy the Arnworx one which is from memory around $30 or get one fabbed up locally. As for tensioner measurement tools then either Arnworx again or the Krikit which is £20-30 or so. Editted to add I'd lend you mine but I'm just about to use it! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|