| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| What products to use for engine detailing? https://forums.tipec.net/viewtopic.php?f=15&t=2188 |
Page 1 of 1 |
| Author: | village eejit [ Sun Nov 16, 2008 6:52 pm ] |
| Post subject: | What products to use for engine detailing? |
What products/methods can you guys recommend to degrease and clean up the shabby looking engine compartment in my 944 S2 Cabby? After seeing Lindsay's 944 engine bay at the NEC, I feel shamed into cleaning mine up.  Thinking about painting the camshaft cover red as well probably with VHT paint. Is this a good make or are there better ones? Don't think I'll bother cleaning the Boxster's engine as I can't find the bloody thing. 
|
|
| Author: | tr7v8 [ Sun Nov 16, 2008 7:45 pm ] |
| Post subject: | Re: What products to use for engine detailing? |
I've always used gunk on to a warm engine & then washed it off, have just bought the greener, more pleasant Bilt Hamber equivalent but ain't tried it yet. TBH paint for the cam cover doesn't have to be VHT. I've used Halfords normal touch in aerosols car paints before & laquered them after. If they get too hot for the paint then you have bigger issue than the paint! It does need to go onto an immaculately clean surface though. Getting the grease & gunge off is by far the biggest issue. Be careful if you get it powder coated, if powder coating gets inside the heat will make it flake & it blocks oil ways! 
|
|
| Author: | Sean Smallman [ Sun Nov 16, 2008 9:24 pm ] |
| Post subject: | Re: What products to use for engine detailing? |
Bring it up one weekend and we'll have a go at it. |
|
| Author: | lindsayhbrown [ Sun Nov 16, 2008 9:34 pm ] |
| Post subject: | Re: What products to use for engine detailing? |
cam cover on mine is powder coated, had it done at a local alloy wheel refurbisher, inner wings etc done with a solvent cleaner/degreaser and the hoses etc blacked with tyre blackner, loadsa piccies taken of my engine, but not by me as i forgot to take my camera, DOH !!! |
|
| Author: | village eejit [ Mon Nov 17, 2008 11:31 am ] |
| Post subject: | Re: What products to use for engine detailing? |
Sean Smallman wrote: Bring it up one weekend and we'll have a go at it. Thanks a lot Sean.  I'll drive it to the monthly meeting next Monday so you can have a quick look to see what state it's in. |
|
| Author: | Graham Waller [ Mon Nov 17, 2008 3:43 pm ] |
| Post subject: | Re: What products to use for engine detailing? |
I know Lindsay's was nice, but does that mean I have to do my engine too? I hope not!! 
|
|
| Author: | JasonGibson [ Mon Nov 17, 2008 5:00 pm ] |
| Post subject: | Re: What products to use for engine detailing? |
VHT paint works well, as does Hammerite Aerosol What would look good is Prepare your cam cover and give the lettering area a few coats of bright silver Then mask off the lettering and use VHT Black crinkle paint (like Ferrari cam covers) |
|
| Author: | village eejit [ Mon Nov 17, 2008 6:32 pm ] |
| Post subject: | Re: What products to use for engine detailing? |
I like the idea of the crackle paint, but I think I'll stick with red (like the F430 below) to contrast the grey body. |
|
| Author: | JasonGibson [ Thu Nov 20, 2008 10:54 pm ] |
| Post subject: | Re: What products to use for engine detailing? |
Cool Just a note that when the engine is hot the red isn't so bright I've got red crackle on my spider cam covers It's been on there for 8 years now and really needs re painting 
|
|
| Author: | dnaxton [ Thu Nov 27, 2008 7:42 am ] |
| Post subject: | Re: What products to use for engine detailing? |
Autoglym engine bay cleaner is ideal to removing the dirt/oil e.t.c from the engine bay area. Just spray the pruduct onto a cool/cold engine and work in with a brush,then rinse with cold water. 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|