| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 1981 924 Wheel Spec https://forums.tipec.net/viewtopic.php?f=14&t=328 |
Page 1 of 1 |
| Author: | nrwilliams [ Sat Dec 22, 2007 9:32 pm ] |
| Post subject: | 1981 924 Wheel Spec |
Hello, Does anyone have a definitive answer regarding the offset of a set of wheels for the above car? I have read both 15mm and 34mm offset and need to know so I can source another set of wheels. Anyone else upgraded the wheels on their 924? It has the 4 stud wheels. Thanks Neil |
|
| Author: | Matt924lux [ Wed Mar 05, 2008 10:20 pm ] |
| Post subject: | Re: 1981 924 Wheel Spec |
HI there, I have just been measuring the wheel from my '84 2 litre 924 as I saw some wheels on ebay that may fit, but they dont. Anyway the offset is approx 35mm and it has an approx 63mm center bore. The pcd or stud spacing is 108 X 4. Hope this helps if you havent already found out yourself. I belive that Citreon, Ford, Mazda, Peugeot, Saab and Volvo four stud wheels will fit but some may require a spacer for the required offset to be acchieved. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|