| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Changing alloys https://forums.tipec.net/viewtopic.php?f=14&t=25031 |
Page 1 of 1 |
| Author: | Kulli [ Tue Aug 09, 2022 11:42 am ] |
| Post subject: | Changing alloys |
Hi, I am looking to change my alloys on my 911 3.2 1989 (temporarily) from fuch to boxster 17 in alloys (look like twist alloys, also seen them called Turbo Look 1). I ve done a bit of research - I am not a mechanic but the exisiting alloys are Fuch alloys are 16inch, fronts have ET 25, backs have ET 11 (from a website). Tyres are 205 x 55 ZR 16 and 225 x 50 zr 16. The boxster alloys are front- 205/50 r17 ET 55 7 inch wide, Back 255 40 r17 ET 50 8.5 inches. So I think, their is a ET difference. What do I need to get the boxter wheels on. My thoughts are for front difference in ETs are 55- 25 = 30 - see need spacers of 30mm and for back differnces are 50- 11 = 39 so need spacers of 40mm. Have I done this right and is there anything else to consider? Next part is, does anyone know of a store/website that sells quality spacers that are not too expensive. (Some spacers are costing more than the a new set of tyres). Look forward to replies. regards, Kul |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|