| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 924 turbo wheels. Will they fit? https://forums.tipec.net/viewtopic.php?f=14&t=18307 |
Page 1 of 1 |
| Author: | Will [ Tue Aug 12, 2014 8:29 pm ] |
| Post subject: | 924 turbo wheels. Will they fit? |
I'm looking for alloys for my 924 turbo and have found these on eggbay. Can anyone tell me if they will fit. Thanks chaps/chapets 15" Fuchs Style alloy wheels rims 7.0J & 8.0J black & polished rims (SET OF 4) SET OF 4 Wheels. Front 7.0J ET23 & Rear 8.0J ET10 replacement Fuchs style wheels. BLACK CENTRE with POLISHED outer rim. SPECIAL OFFER with FREE centre caps Front: 7.0x15, Offset ET23, PCD 5x130, Weight 8.65Kg. (Recommend Tyres size: 215/60/15) Rear : 8.0x15, Offset ET10.6, PCD 5x130, Weight 7.85Kg. ( Recommend Tyres size: 225/50/15) Price is for SET OF 4 Wheels |
|
| Author: | Carrera RSR [ Wed Aug 13, 2014 9:51 pm ] |
| Post subject: | Re: 924 turbo wheels. Will they fit? |
Fronts will fit similar to my Fuchs which are 7'' with ET23, however the recommended tyres will be too wide and tall. I'm running lower, more neg camber and 16'' The rears will not fit as the ET10 will cause them to poke out of the arch too far. You can run a 7'' with ET23 or higher as per mine but again I'm lower, more neg camber and 16''. My tyres are equivalent to 205 50 16 in size. There's also a 10mm spacer in the rear versus the usual 20mm. |
|
| Author: | JasonGibson [ Wed Aug 13, 2014 11:51 pm ] |
| Post subject: | Re: 924 turbo wheels. Will they fit? |
what do you have on the front Steve ? I'm about to put some Cup 1's on mine Fronts 16 x 7 ET55 Rears 16 x 8 ET52 possibly with 205/55/16 and 225/50/16 |
|
| Author: | Carrera RSR [ Thu Aug 14, 2014 7:16 pm ] |
| Post subject: | Re: 924 turbo wheels. Will they fit? |
7x16 ET23 genuine Fuchs with Avon 195 50 16's (they are 205mm wide) on both ends. No spacer on the front but 10mm on the rear. About 60mm lower than stock. Lots of neg camber to tuck the wheels into the arches Your tyres will be tight to the arches Jason. They wouldn't work for me 7x16 ET23 with 205 55 16 on both ends in this pic. The 225's wouldn't go under the arch. A larger ET may help but you are in danger of hitting the inner arch. Undriveable at the front end as is 
|
|
| Author: | JasonGibson [ Thu Aug 14, 2014 8:07 pm ] |
| Post subject: | Re: 924 turbo wheels. Will they fit? |
I have been trying to work out if the 225's will be ok Currently have 195 65 15's and there seems to be plenty of room Will be dropping mine around 20 - 25mm No issues with the front's the rears will sit 15mm wider on both sides but the rear arches aren't rolled 
|
|
| Author: | Will [ Fri Aug 15, 2014 8:13 pm ] |
| Post subject: | Re: 924 turbo wheels. Will they fit? |
Cheers. Thought the rears would be toooo wide. That red and white car is stunning btw |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|