| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 16" teledials with 65.2 offset? https://forums.tipec.net/viewtopic.php?f=14&t=16196 |
Page 1 of 1 |
| Author: | joshe [ Fri Sep 27, 2013 1:59 pm ] |
| Post subject: | 16" teledials with 65.2 offset? |
I've come across a set of 16" 7j teledials for sale but the seller states they are 65.2 offset. I under the impression these only came in 23.3 and 52.3 offset? Quote: An extremely clean set of wheels, wrapped in 195 40 16 rubber with good tread on all. The wheels are 16" , 7J wide all around and come in a very rare 65.2 offset. Any ideas? |
|
| Author: | bmjb [ Sat Sep 28, 2013 4:58 pm ] |
| Post subject: | Re: 16" teledials with 65.2 offset? |
Early 928s had all four wheels with offset ET65 and width 7"; although the earliest teledials were 15" I believe that 16" teledials were available for a short time, so the seller may have a set of these. The offset should be on the wheels themselves, normally near the valve for cast wheels or stamped into the back on forged ones. |
|
| Author: | joshe [ Mon Sep 30, 2013 11:47 am ] |
| Post subject: | Re: 16" teledials with 65.2 offset? |
bmjb wrote: Early 928s had all four wheels with offset ET65 and width 7"; although the earliest teledials were 15" I believe that 16" teledials were available for a short time, so the seller may have a set of these. The offset should be on the wheels themselves, normally near the valve for cast wheels or stamped into the back on forged ones. Thanks, I wonder if there are any photos of 944's with the ET65 wheels on? Presumably they'll stick out into the arches slightly more? And I guess these are quite rare and hence demand abit of a premium over the standard 15" teledials. |
|
| Author: | Gunscrossed [ Tue Oct 22, 2013 7:21 pm ] |
| Post subject: | Re: 16" teledials with 65.2 offset? |
Apparently the 928 16" teledials are in demand, viewtopic.php?f=27&t=13985&start=15 Might be worth getting if they're a good price? |
|
| Author: | 944 Man [ Fri Nov 01, 2013 9:47 am ] |
| Post subject: | Re: 16" teledials with 65.2 offset? |
Theyll look pretty bad on a 944. The excessive offset and the modest width means that the whole centre is proud of the wheel. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|