16" teledials with 65.2 offset?

joshe · **Posted:** Fri Sep 27, 2013 1:59 pm

I've come across a set of 16" 7j teledials for sale but the seller states they are 65.2 offset. I under the impression these only came in 23.3 and 52.3 offset?

Quote:

An extremely clean set of wheels, wrapped in 195 40 16 rubber with good tread on all. The wheels are 16" , 7J wide all around and come in a very rare 65.2 offset.

Any ideas?

bmjb · **Posted:** Sat Sep 28, 2013 4:58 pm

Early 928s had all four wheels with offset ET65 and width 7"; although the earliest teledials were 15" I believe that 16" teledials were available for a short time, so the seller may have a set of these. The offset should be on the wheels themselves, normally near the valve for cast wheels or stamped into the back on forged ones.

joshe · **Posted:** Mon Sep 30, 2013 11:47 am

bmjb wrote:

Early 928s had all four wheels with offset ET65 and width 7"; although the earliest teledials were 15" I believe that 16" teledials were available for a short time, so the seller may have a set of these. The offset should be on the wheels themselves, normally near the valve for cast wheels or stamped into the back on forged ones.

Thanks, I wonder if there are any photos of 944's with the ET65 wheels on? Presumably they'll stick out into the arches slightly more? And I guess these are quite rare and hence demand abit of a premium over the standard 15" teledials.

Gunscrossed · **Posted:** Tue Oct 22, 2013 7:21 pm

Apparently the 928 16" teledials are in demand, viewtopic.php?f=27&t=13985&start=15

Might be worth getting if they're a good price?

944 Man · **Posted:** Fri Nov 01, 2013 9:47 am

Theyll look pretty bad on a 944. The excessive offset and the modest width means that the whole centre is proud of the wheel.

Porsche Enthusiasts Club Forum

16" teledials with 65.2 offset?

Who is online