| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Turbo teledials https://forums.tipec.net/viewtopic.php?f=14&t=13148 |
Page 1 of 1 |
| Author: | DaveP [ Sun Jun 03, 2012 9:29 pm ] |
| Post subject: | Turbo teledials |
Will 16" turbo teledials (7" front and 9" rear) fit an '89 944 lux??? (currently fitted with 15" teledials) |
|
| Author: | sharkman07 [ Sun Jun 03, 2012 9:48 pm ] |
| Post subject: | Re: Turbo teledials |
I have a set of 16'' Turbos on my 2.7 so they should. |
|
| Author: | DaveP [ Mon Jun 04, 2012 9:22 am ] |
| Post subject: | Re: Turbo teledials |
Do they bolt straight on or do I need spacers too? |
|
| Author: | A9XXC [ Sat Jun 09, 2012 8:58 pm ] |
| Post subject: | Re: Turbo teledials |
There are various offsets available in teledials, assuming they are the larger ones (52mm and 60 something) they will bolt straight on, without spacers. This is the most likely situation, but if they are early offset (23mm and approx 30) they wont fit - spacers or no spacers! The confusion is that the early versions should be 7" and 8" but the later ones 7.5" and 9". Find out the offset, cast in either by the valve, or on the rear of the spokes. |
|
| Author: | DaveP [ Mon Jun 11, 2012 8:29 pm ] |
| Post subject: | Re: Turbo teledials |
Thanks for the info. I almost went for a set recently which were early offset - would have been a big mistake! |
|
| Author: | 944 Man [ Mon Jun 11, 2012 8:35 pm ] |
| Post subject: | Re: Turbo teledials |
Mike, Im pretty confident that theyre all 7" and 8" irrespective of year (MY86 ET23; MY87 & MY88 ET52.3). |
|
| Author: | 944 Man [ Mon Jun 11, 2012 8:37 pm ] |
| Post subject: | Re: Turbo teledials |
To clarify: if theyre 9" wide at the back, theyll be 8" wide at the front, made of magnesium and off an M754 1987> Turbo Cup car. Simon |
|
| Author: | A9XXC [ Fri Jun 15, 2012 8:50 pm ] |
| Post subject: | Re: Turbo teledials |
Thanks for the clarification Simon, am I getting mixed up with D90s or CS wheels in 7.5" |
|
| Author: | Sean Smallman [ Fri Jun 15, 2012 8:58 pm ] |
| Post subject: | Re: Turbo teledials |
D90's were 7 and 8 6 and 8 on the 964. |
|
| Author: | 944 Man [ Tue Aug 28, 2012 2:16 am ] |
| Post subject: | Re: Turbo teledials |
I frequently over look the 1990 model Turbo/928 D90s too, which were 7.5" and 9" wide. D90s were available with 6", 7", 7.5", 8" & 9" wide rims. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|