| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 1982 944 Lux Electric Windows non function https://forums.tipec.net/viewtopic.php?f=13&t=7612 |
Page 1 of 1 |
| Author: | bazbarnett [ Sun Jan 17, 2010 10:29 pm ] |
| Post subject: | 1982 944 Lux Electric Windows non function |
Hi Windows not working for a while now, have taken off and cleaned all switches, replaced all the fuses in the fuse box and still no joy. Have had a problem locating a relay chart for a 1982 944, on enquiry with parts place they say that there is one for the later models, but apparently not for the 1982 one. Could this be a wiring problem then? I'd appreciate your invaluable comments..... also any suggestions on a rely chart for mine... ta Baz |
|
| Author: | J.J. [ Sun Jan 17, 2010 11:54 pm ] |
| Post subject: | Re: 1982 944 Lux Electric Windows non function |
Have you put 12v direct to the motors to check there ok. Is the wiring good where it bends near the hinges. Could cause a short that stops the lot working. If the wiring checks out ok using a multimeter. Then swap out the relay. I have some similar jobs waiting for warmer weather! |
|
| Author: | bazbarnett [ Thu Jan 28, 2010 10:47 pm ] |
| Post subject: | Re: 1982 944 Lux Electric Windows non function |
Thanks for that JJ but not technical minded whatsoever so not sure how to go about what you've suggested!!! Much appreciated though.. Baz |
|
| Author: | bazbarnett [ Thu Jan 28, 2010 10:49 pm ] |
| Post subject: | Re: 1982 944 Lux Electric Windows non function |
Me again - furthermore if it was the relay I'm not sure where to locate it as I have yet to find a relay chart for the first 944... Baz |
|
| Author: | J.J. [ Fri Jan 29, 2010 12:51 pm ] |
| Post subject: | Re: 1982 944 Lux Electric Windows non function |
Isn't there one on the lid of the fusebox? |
|
| Author: | bazbarnett [ Tue Feb 02, 2010 12:13 am ] |
| Post subject: | Re: 1982 944 Lux Electric Windows non function |
I believe there is but it doesn't describe what each relay is, just the numbers of them. (I think).... I'll investigate... Thanks for the advice |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|