Porsche Enthusiasts Club Forum

Hi Guys
I have a bit of a problem don't ask why but I removed fuse 41 (15 Amp Porsche Entry and Drive) I then got distracted somehow managed to lock the car.
The problem I now have is:
The key fob will not open the doors
I can open the car using the key in the drivers door lock
Putting the key in the ignition does nothing at all, no dash lights nothing the alarm goes off, the only way to get the key out of the ignition is by pressing the release button with a thin object then close the doors using the key to stop the alarm.
I cannot open the passenger door to replace fuse 41

Any help and advice would be much appreciated, yes the first bit of advice is DON'T REMOVE FUSE 41 and lock the car.

Please can someone help me open the passenger door?

Many thanks in advance
Charles

My passenger door was stuck after central locking clip failed. It turned out to be the outer door pull lever was stiff and wasn’t returning fully. Only slightly in and door wouldn’t open from inside or out until it was pushed back into position.

If this is not the issue then I suggest using either a coat hanger or flat bit of metal to hook the connector to the locking button.

You can guess from this reply in which order I tried.

Andy S





I