Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Correct position for the bonnet badge on a pre 73 longhood https://forums.tipec.net/viewtopic.php?f=11&t=19423 |
Page 1 of 1 |
Author: | Klassiker 911 [ Wed Mar 04, 2015 7:57 am ] |
Post subject: | Correct position for the bonnet badge on a pre 73 longhood |
I'm in the final stages of a backdate project and getting to the finishing touches, badges etc. can anyone tell me the exact position the bonnet badge should be fitted? Dimensions from the front edge of the bonnet would be good |
Author: | Klassiker 911 [ Thu Mar 05, 2015 10:29 pm ] |
Post subject: | Re: Correct position for the bonnet badge on a pre 73 longho |
Please, can someone give me the accurate dimensions from the front edge of the bonnet to the bottom of the badge or mounting holes |
Author: | savagewomble [ Sat Mar 07, 2015 1:08 pm ] |
Post subject: | Re: Correct position for the bonnet badge on a pre 73 longho |
I'm just on way back to uk. I will measure mine tomorrow. Would you like the dimensions to the mounting holes or the badge itself? Cheers Dan |
Author: | savagewomble [ Sun Mar 08, 2015 2:54 pm ] |
Post subject: | Re: Correct position for the bonnet badge on a pre 73 longho |
Hi I've just measured my bonnet badge and it is 165mm from the front edge to the bottom point of the badge. hope this helps Dan |
Author: | Klassiker 911 [ Sun Mar 08, 2015 11:11 pm ] |
Post subject: | Re: Correct position for the bonnet badge on a pre 73 longho |
Dan, cheers, that's the measurement I was after Matt |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |