Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Hood problem
https://forums.tipec.net/viewtopic.php?f=10&t=4806		 Page 1 of 1
Author:  Wilbur [ Wed Jun 24, 2009 4:56 pm ]
Post subject:  Hood problem
Hello! Can anyone help with this problem? I can get my roof to go down. When i release the handle the windows drop as normal but nothing else! I removed the motor and checked/cleaned it all and everything works there so can only assume its something to do with the cables. The hood indicator light is staying on now which is also annoying! Any ideas? Cheers! :bounce:
Author:  tr7v8 [ Wed Jun 24, 2009 7:20 pm ]
Post subject:  Re: Hood problem
I believe that the cables can break. Not sure of replacement but a google might produce some results. I understand there were changes during the Boxsters production which made them less likely to break.
Author:  brian2.5 [ Wed Jun 24, 2009 9:28 pm ]
Post subject:  Re: Hood problem
If you do a search on the boxanet forum you will find quite a bit of info on the cables breaking and how to carry out the repair, also Gary Hubbard is often on there and he fits replacement hoods so has a great deal of knowledge.
Author:  piperboxster [ Thu Jun 25, 2009 12:23 am ]
Post subject:  Re: Hood problem
Sounds like a microswitch problem
Author:  poison [ Sun Jun 28, 2009 11:38 am ]
Post subject:  Re: Hood problem
hi know how you feel,if you read by posting roof malfunction,all i did was disconnect the battery and all worked well after i reconnected it and followed the procedure i had on a service disk,my light never came on and once i released the catch and the windows dropped down i could not hear any motors running etc,can give you info if you want :?:
Author:  Wilbur [ Tue Jun 30, 2009 9:46 pm ]
Post subject:  Re: Hood problem
poison wrote:
hi know how you feel,if you read by posting roof malfunction,all i did was disconnect the battery and all worked well after i reconnected it and followed the procedure i had on a service disk,my light never came on and once i released the catch and the windows dropped down i could not hear any motors running etc,can give you info if you want :?:


Hi, thanks for all the ideas, if you can give me more info on your problem it would be much appreciated. Summer is here and I want my roof down! :(
Author:  dawthan [ Wed Jul 01, 2009 6:55 pm ]
Post subject:  Re: Hood problem
the switch in the front where the hook latches has 2 microswitches in it , you sometimes end up with dry solder joints in this causing the said effect.... it is held up by 2 torx 30 screws under the 2 black covers..
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/