Porsche Enthusiasts Club Forum

It is currently Thu Mar 28, 2024 11:26 am
Classic Line Insurance


All times are UTC [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Headlight Upgrades
PostPosted: Sat Jun 30, 2018 11:45 pm 
Offline

Joined: Tue Sep 14, 2010 1:44 pm
Posts: 326
Location: Argyllshire
TIPEC membership: 6177
white944 wrote:
LED or HiD bulbs in a lamp designed for conventional incandescent bulbs are now an MoT failure.


Really? Since when specifically? It WAS always down to the judgement of the individual tester.

Rob

_________________
Rob


1992 944 S2
1988 924S


Top
 Profile  
Reply with quote  
 Post subject: Re: Headlight Upgrades
PostPosted: Sun Jul 01, 2018 10:33 am 
Offline
User avatar

Joined: Sat Aug 31, 2013 3:04 pm
Posts: 44
robmal wrote:
white944 wrote:
LED or HiD bulbs in a lamp designed for conventional incandescent bulbs are now an MoT failure.


Really? Since when specifically? It WAS always down to the judgement of the individual tester.

Rob

Since the new rules came in in May:
https://www.gov.uk/government/publicati ... -section-4

Michael


Top
 Profile  
Reply with quote  
 Post subject: Re: Headlight Upgrades
PostPosted: Sun Jul 01, 2018 10:36 am 
Offline

Joined: Tue Nov 19, 2013 11:48 am
Posts: 2729
Location: West Essex
TIPEC membership: 0
that would be due to the number of accidents happening due to drivers being blinded by badly fitted HID kits, Non compliant LED bulbs, badly adjusted beam patterns, now they just need to sort out all the one or two or three bulbs out cars on the roads

_________________
1992 968 Coupe Cobalt Blue
1985 Honda VF1000 F2 Bol D'or In Silver
2013 A4 177 TDI Quattro Ibis White
2013 Volvo XC60 D5 brilliant car


Top
 Profile  
Reply with quote  
 Post subject: Re: Headlight Upgrades
PostPosted: Sun Jul 01, 2018 3:12 pm 
Offline

Joined: Thu Apr 30, 2015 9:36 pm
Posts: 27
Location: somerset
TIPEC membership: 7399
However!
https://www.mot-testing.service.gov.uk/ ... ection_4.1

Defect

Category


a.A headlamp:

i.with up to ½ light sources not functioning in the case of LED
Minor
ii.missing, inoperative or more than ½ not functioning in the case of LED
Major
b.Headlamp reflector or lens:

i.slightly defective
Minor
ii.seriously defective or missing
Major
c.Lamp not securely attached
Major



Top of page

4.1.2 Headlamp alignment

You must inspect all dipped beam headlamps fitted.

The type of headlamp will determine whether the aim must be checked on dipped or main beam (see Diagrams 1, 2 and 3).

A flat top or other alternative headlamp dipped beam pattern is acceptable as long as all of the beam upper edge, including any ‘peak’ is contained within the appropriate tolerance band.

It's acceptable for masks or converter kits to be fitted to right hand dip headlamps to temporarily alter the lamp for use in the UK by removing the beam ‘kick-up’ to the right.

If driver’s beam aim controls are fitted, you should test the beam aim without altering the control setting. If this would result in failure for beam aim being too low, you should re-check the beam aim with the control set at its ‘highest’ position.

On vehicles with hydro-pneumatic suspension systems, it's necessary to have the engine running when checking headlamp aim.

To check the aim:
1.Position the vehicle on the designated headlamp aim standing area.
2.Align the headlamp aim testing equipment to the vehicle in accordance with the manufacturer’s instructions.
3.Determine the appropriate headlamp beam image and its aim (see Diagrams 1, 2 and 3).

For complex lens systems – meaning those that have more than one lamp behind a single lens – make sure the test equipment is aligned exactly on the centre of the dipped beam pocket.

You mustn’t carry out repairs during an MOT test, but you can make minor adjustments to the headlamp aim.

European type – check on dipped beam

European type lamps have one of the following:
•an asymmetric dipped beam pattern with
◦a horizontal cut-off on the right
◦a wedge of light above the horizontal towards the left, known as the 'kick up'
•lens may have European approval mark

For European type lamp to pass, you must make sure that:
•beam image 'kick up' is visible on the screen
•for headlamps with centres at 850mm or less from the ground, the beam image horizontal cut-off is between the 0.5% and 2.75% horizontal lines
•for headlamps with centres more than 850mm from the ground, the beam image horizontal cut-off is between the 1.25% and 2.75% horizontal lines
•white light doesn't show in the zone formed by the 0% vertical and 0.5% horizontal line
:)


Top
 Profile  
Reply with quote  
 Post subject: Re: Headlight Upgrades
PostPosted: Wed Jul 04, 2018 12:59 pm 
Offline
User avatar

Joined: Sun Mar 11, 2012 11:03 am
Posts: 620
Location: Bolton U.K.
TIPEC membership: 6602
I eventally got the Morimotos in. The performance is excellent. Very sharp cut off no scatter or dazzle. Instant main beam and great foreground illumination. A real struggle to do though.
Pinched the idea from this article:- https://rennlist.com/forums/924-931-944 ... r-mod.html

_________________
Porsche 944 S2 Coupe Guards Red
Porsche 993 Coupe Guards Red
Ducati 998 FE Red oc


Top
 Profile  
Reply with quote  
 Post subject: Re: Headlight Upgrades
PostPosted: Fri Dec 30, 2022 1:14 pm 
Offline

Joined: Fri Dec 30, 2022 1:09 pm
Posts: 2
TIPEC membership: 0
JW590 wrote:


Digging up this thread.
Has anybody fitted these lamps to an S2 (or car with the electric levelling lamps)?
the original hela lamps seem to have three lugs with quite large holes in that the motor and retaining clips fit into.
I cannot see what fitting lugs/holes if any these led lamps have.
Cheers
Jon


Top
 Profile  
Reply with quote  
 Post subject: Re: Headlight Upgrades
PostPosted: Fri Dec 30, 2022 1:29 pm 
Offline

Joined: Fri Dec 30, 2022 1:09 pm
Posts: 2
TIPEC membership: 0
JW590 wrote:


Has anybody installed these on an s2 with the electric levelling?
The original lamps seem to have three large with quite large circular hols in that fix it to the clips on the mounting pillars.
It's not possible to see what mounting lugs if any these LED lamps have.
Cheers
Jon


Top
 Profile  
Reply with quote  
 Post subject: Re: Headlight Upgrades
PostPosted: Wed Mar 08, 2023 10:15 pm 
Offline

Joined: Thu Mar 03, 2011 9:06 pm
Posts: 127
Location: NW London
TIPEC membership: 0
Endoman wrote:
I eventally got the Morimotos in. The performance is excellent. Very sharp cut off no scatter or dazzle. Instant main beam and great foreground illumination. A real struggle to do though.
Pinched the idea from this article:- https://rennlist.com/forums/924-931-944 ... r-mod.html


Can you share some pictures please? Would love to see how these look.

_________________
'91 994t


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group