*forgot to say - gen 1 3.8. But I guess that was obvious as I said I was having liners fitted
| Porsche Enthusiasts Club Forum http://forums.tipec.net/ |
|
| 997 Crank case http://forums.tipec.net/viewtopic.php?f=8&t=23098 |
Page 1 of 1 |
| Author: | sumpcracker [ Sun Dec 17, 2017 5:12 pm ] |
| Post subject: | 997 Crank case |
I have just stripped my engine for liners, and I noticed there are no locating dowles from the crank cradle to block/crank case. I am surprised to see this, I have assembled a few older M96 ones before and I am sure they were there. Does anyone know if this is correct? Surely without them the cradle is only clamped by the head bolts and could creep? (causing rms leaks, front crank seal issue or even a broken crank) Pls help! |
|
| Author: | sumpcracker [ Sun Dec 17, 2017 5:13 pm ] |
| Post subject: | Re: 997 Crank case |
*forgot to say - gen 1 3.8. But I guess that was obvious as I said I was having liners fitted
|
|
| Author: | Sean Smallman [ Sun Dec 17, 2017 9:32 pm ] |
| Post subject: | Re: 997 Crank case |
Contact Barry Hart at Hertech, he will willingly answer any questions. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|