Porsche Enthusiasts Club Forum http://forums.tipec.net/ |
|
1976 911SC Targa Engine Removal http://forums.tipec.net/viewtopic.php?f=7&t=21346 |
Page 1 of 1 |
Author: | CJG944 [ Thu Apr 28, 2016 8:29 pm ] |
Post subject: | 1976 911SC Targa Engine Removal |
Just a quick question, is it recommended to remove the engine with the transmission or split them prior to dropping the engine? Thanks in advance. |
Author: | sjwright944 [ Sun May 01, 2016 8:41 am ] |
Post subject: | Re: 1976 911SC Targa Engine Removal |
I've only ever removed the engine and transmission once so not an expert, but when I put it back in I intend to keep them together and would certainly remove them together next time. When removing I ended up with the engine tilted at an angle to the gearbox but still slightly attached so now I'm worried I may have bent the shaft. |
Author: | CJG944 [ Sun May 01, 2016 9:34 am ] |
Post subject: | Re: 1976 911SC Targa Engine Removal |
It's unlikely that you have bent the input shaft as they are pretty thick. I have taken the engine out and left the transmission but it all happened a bit quick on final release. I will put back as a whole I think. You live and learn. |
Author: | Freeman [ Mon May 01, 2017 7:48 pm ] |
Post subject: | Re: 1976 911SC Targa Engine Removal |
I have taken the engine out twice on its own without any issues. I don't see much point taking the gearbox unless you need too. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |