Porsche Enthusiasts Club Forum

my brake pad warning light came on and as i often overheat the pads i have just replaced the old ones with ebc green's, ( with no wear indicators) the warning light is still on. is there a way to reset the indicator.
thanks

Doesn't the warning light work on an earthing ie when the sensor earths with the disc the warning light comes on? or am I not understanding your problem/situation?

Dave

have you put a wear indicator on each axle and tied them up or have you just left the plug empty on the hub if so then that is why you have light on as it needs to make a circuit and whilst disconnected is an open circuit