Porsche Enthusiasts Club Forum

It is currently Fri Mar 29, 2024 2:54 pm
Classic Line Insurance


All times are UTC [ DST ]




Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 3:28 pm 
Offline
User avatar

Joined: Wed Oct 30, 2013 2:41 pm
Posts: 273
Location: London Town
TIPEC membership: 7975
So, a previous owner of my newly acquired 993 decided that the worst thing in the World was having to listen to the roar of an AirCooled Flat Six Engine whilst they tried to listen to Celine Dion's Greatest Hits album [presumably]. So, said owner removed the carpet, stuck a Tonne [no exaggeration] of Sound Proofing Tape on the chassis of this Beauty. I won't mention the speakers whose cones are too deep for the shelf. Oh, except I just did. Anyways, they then decided that they wanted Recording Studio like sound deadening so stuck an Abbey Road's worth of Foam to the Tape. And then put the carpet back. No wonder the cabin felt smaller.

So.. What I'd really like help with is a way to remove the Tape.. It's the horrible black-sticky-backed foil type tape/sheets..

And besides the obvious "Elbow Grease" solution, which will be employed in any event, is there a "Scrape most of it off with a Wooden Spatula and then use this..~" solution..?


Image

_________________
Hasta Luego
KingRoon

https://kingroon.blog


Last edited by kingroon on Mon Feb 20, 2017 5:11 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 5:09 pm 
Offline

Joined: Mon Nov 12, 2007 1:16 am
Posts: 4903
Location: Emsworth Hants
TIPEC membership: 993
My god, what a mess!! no idea how to remove that sh1t, but sure someone on here will.........................good luck :shock:


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 5:23 pm 
Offline
User avatar

Joined: Wed Oct 30, 2013 2:41 pm
Posts: 273
Location: London Town
TIPEC membership: 7975
sam wrote:
My god, what a mess!! no idea how to remove that sh1t, but sure someone on here will.........................good luck :shock:

Yep, it's a mess alright..

Have been doing some Googling on the matter this afternoon [whilst making it look like I'm actually doing some work] and apparently using a CO2 Fire Extinguisher [with plenty of ventilation of course] provides a solution. It freezes the Tar-like backing, allowing it to be "chipped" away using a plastic spatula and hammer etc.

>> http://honda-tech.com/forums/honda-crx- ... re-182677/

Perhaps use this once the majority of the soundproofing / tar has been chipped away..?

>> http://www.clean4less.co.uk/tar-and-glu ... er-5l.html

_________________
Hasta Luego
KingRoon

https://kingroon.blog


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 5:46 pm 
Offline

Joined: Mon Nov 12, 2007 1:16 am
Posts: 4903
Location: Emsworth Hants
TIPEC membership: 993
As I say, good luck........................I don't envy you!! Did you have any luck with finding some wheels? My faves are cup 1's but like that rocking horse stuff, and heaps of dough too! Haven't checked they fit, but I think so. The Fuchs copies look good too in the right colour, particularly if you have lowered suspension.


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 5:52 pm 
Offline
User avatar

Joined: Wed Oct 30, 2013 2:41 pm
Posts: 273
Location: London Town
TIPEC membership: 7975
sam wrote:
Did you have any luck with finding some wheels?

Yeah, have got some 17" Cup 2s on the way; I want to stay relatively stock with the look.. That BBS / Speedline / Veloce look has been done to death I think.. :?

The 993 will get dropped a bit, courtesy of some Bilsteins.. I think I'm headed for more of a CS look, than an RS one.. 8)

FYI, and if you want to follow the Build.. http://www.kingroon.blog/

_________________
Hasta Luego
KingRoon

https://kingroon.blog


Last edited by kingroon on Mon Feb 20, 2017 5:57 pm, edited 2 times in total.

Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 5:57 pm 
Offline

Joined: Mon Nov 12, 2007 1:16 am
Posts: 4903
Location: Emsworth Hants
TIPEC membership: 993
Got my suspension totally sorted by Chris Franklin at CG, transformed the car :D


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 6:01 pm 
Offline
User avatar

Joined: Wed Oct 30, 2013 2:41 pm
Posts: 273
Location: London Town
TIPEC membership: 7975
sam wrote:
Got my suspension totally sorted by Chris Franklin at CG, transformed the car :D

Awesome, I bet the transformation is quite something..! Cannot wait..

I have a good mate in Stefan at Analogue Automotive near Petersfield, so he'll be doing all the necessary work.. 8)

_________________
Hasta Luego
KingRoon

https://kingroon.blog


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 6:08 pm 
Offline

Joined: Mon Nov 12, 2007 1:16 am
Posts: 4903
Location: Emsworth Hants
TIPEC membership: 993
Just up the road from me.....................


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Mon Feb 20, 2017 6:29 pm 
Offline

Joined: Sat Feb 18, 2017 6:10 pm
Posts: 49
Location: Rainham, Kent
TIPEC membership: 0
I often wonder what people are thinking when they make alterations like this, don't know what state their mind is in.

I use a fair amount of degreasing solvents and a specific version called "Nova Clean" which seems to do the job very well. Frustratingly that black tape backing, depending on what brand, can be an absolute nightmare to get off. Heat can also be very helpful. Is the adhesive still tacky or has it dried and gone crisp?


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Tue Feb 21, 2017 8:53 am 
Offline
User avatar

Joined: Mon Sep 09, 2013 6:42 pm
Posts: 109
Location: Lichfield, Staffs
TIPEC membership: 6974
As Big Tomm said in previous post get some heat on it with a hot air gun or hair drier & use a sovent based product on it. Tardis by autosmart should work or thinners/white spirit. I would spray the solvent on & let it soak in for a few mins then use a scraper combined with a rag soaked in whatever solvent you are using. Just be careful how much you are using in that enclosed space & dont spend to long in there or you will be high on the fumes!!

_________________
Chris H

2003 Midnight Blue Boxster & Swift Sport
Lichfield, Staff's


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Tue Feb 21, 2017 10:40 am 
Offline
User avatar

Joined: Wed Oct 30, 2013 2:41 pm
Posts: 273
Location: London Town
TIPEC membership: 7975
Chris H1 wrote:
..or you will be high on the fumes!!

I've had worse Nights in.. :P

So..

I got home last night, and had this issue playing on my mind, so threw down some Cheese to keep me going and attacked the 993.. With great Success as it turns out..!

The saddest part of the work is realising the Carpet is shot, rotten in places and delaminated [?] all over.. BUT.. The Positive is that the Sound Proofing came away relatively easily [although I have countless cuts and nicks on my hands this morning from the aggressive foil]..

So pleased with my efforts though, and even better that the Car beneath the Crime is unaffected and undamaged..

8)


Attachments:
File comment: Plenty of Carpet Backing to be removed, but that sound take less effort with a bit of Solvent, as you Chaps have recommended..
..

C5LatpgWcAYrMGq.jpg
C5LatpgWcAYrMGq.jpg [ 245.77 KiB | Viewed 10606 times ]
File comment: Took both seats out whilst I was there too.. Want to totally clean up the chassis before I put the new carpet in [which might not happen for a while realistically]..
..

C5LatpgWcAQfgmk.jpg
C5LatpgWcAQfgmk.jpg [ 253.76 KiB | Viewed 10606 times ]

_________________
Hasta Luego
KingRoon

https://kingroon.blog
Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Tue Feb 21, 2017 4:37 pm 
Offline
User avatar

Joined: Wed Oct 30, 2013 2:41 pm
Posts: 273
Location: London Town
TIPEC membership: 7975
As an aside, I found this under the Driver Seat :shock: and I wondered why it didn't slide so good on its rails.. Seems this Owner really loved his Celine Dion..

Image

And this is the sum of the Sound Deadening Garbo removed.. About 8-9Kg of it.. :roll:

Image

_________________
Hasta Luego
KingRoon

https://kingroon.blog


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Tue Feb 21, 2017 8:27 pm 
Offline

Joined: Wed Oct 29, 2014 10:40 pm
Posts: 130
Location: Stoke-on-Trent
TIPEC membership: 0
Bet it goes faster and is better on fuel now :D

_________________
944 s2
Peugeot 205 1.9 GTi
Auto Union Munga
407 sw Hdi (day to day)
Honda jazz cvt7 (school run)


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Tue Feb 21, 2017 9:50 pm 
Offline

Joined: Sun Aug 09, 2015 9:34 am
Posts: 531
Location: Peterborough
TIPEC membership: 7496
I think that is what is known as ICE! I have loads of it in various places around my house that I removed from my boy racer car when I sold it 10 years ago and haven't had a car to put it all in since. My 944 isn't designed for 5 1/4" components and 2x10" subs in a box. :lol:

_________________
Porsche 944 2.7 Sold March 2018
Audi A6 3.0TDI LeMans Daily driver
Porsche 911 997 Carrera S in slate grey Purchased October 2018


ARO Peterborough Region


Top
 Profile  
Reply with quote  
 Post subject: Re: Help Wanted: Removing SoundProofing
PostPosted: Wed Feb 22, 2017 10:20 am 
Offline
User avatar

Joined: Wed Oct 30, 2013 2:41 pm
Posts: 273
Location: London Town
TIPEC membership: 7975
coolpaul wrote:
Bet it goes faster and is better on fuel now :D

:lol: I hope so..! :lol:
MichaelW944 wrote:
I think that is what is known as ICE! I have loads of it in various places around my house that I removed from my boy racer car when I sold it 10 years ago and haven't had a car to put it all in since.

I hope I never see the stuff ever again.. :evil:

Picked up some Solvent based Cleaner to take the Carpet Backing and Glue off; with Gloves since the Sound Proofing Foil sliced my skin like Butter..


Attachments:
File comment: Sorry, Environment..
C5QkIKiWQAAuKOR.jpg
C5QkIKiWQAAuKOR.jpg [ 157.15 KiB | Viewed 10580 times ]

_________________
Hasta Luego
KingRoon

https://kingroon.blog
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group