Porsche Enthusiasts Club Forum
http://forums.tipec.net/

Wanted to borrow OPVR 944
http://forums.tipec.net/viewtopic.php?f=36&t=23487
Page 1 of 1

Author:  broady_6 [ Sun Jul 29, 2018 9:29 am ]
Post subject:  Wanted to borrow OPVR 944

Good Morning,

Following my thread here viewtopic.php?f=25&t=23463

Would anyone be willing to lend me an OPRV ideally newer style for my early 944 for me to test, before I spend the eye watering amount. Happy to provide a few beer tokens to yourself.

Or better yet does anyone have one which should it cure the problem, i could by for a reasonable price?

Ta

Author:  Crank Case [ Sat Aug 11, 2018 10:30 am ]
Post subject:  Re: Wanted to borrow OPVR 944

Did you manage to get a lend of an OPVR valve?

Your thread threw up a question. My oil pressure sits at 5 bar unless it's idling. Now that's either:

1) Normal
2) because I had the instrument cluster out to replace bulbs with led's and other bits and pieces which compromised the needle or
3) because my OPRV needs looking at.

I am pretty sure I could extract one for you.

Author:  broady_6 [ Sat Aug 11, 2018 10:33 am ]
Post subject:  Re: Wanted to borrow OPVR 944

Thanks for remind me of this post, yes i was kindly leant one to try. It didn't solve the problem. But help. So I'm still not certain the engine is healthy. but its as well as it going to be until November

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/