Porsche Enthusiasts Club Forum
http://forums.tipec.net/

944 8 valve lower crank pulley wanted
http://forums.tipec.net/viewtopic.php?f=36&t=23434
Page 1 of 1

Author:  sgl1966 [ Sat Jun 30, 2018 2:39 pm ]
Post subject:  944 8 valve lower crank pulley wanted

Hi , I am after a 8 valve lower crank pulley for a 944 . I seem to have misplaced the one I had and only have 16v pulleys .
Thanks simon

Author:  scam75 [ Sun Jul 01, 2018 7:34 pm ]
Post subject:  Re: 944 8 valve lower crank pulley wanted

Hi Simon. I have one. I replaced mine trying to solve a problem and it made no difference, so it must be fine! Was £100 from OPC for a new one! It's the crank pulley itself, with 4 mounting holes. If that is what you need I can do £25 posted.

Cheers

Stuart

Author:  sgl1966 [ Mon Jul 02, 2018 5:46 pm ]
Post subject:  Re: 944 8 valve lower crank pulley wanted

Hi Stuart, thank you for the offer but I had not explained myself very well , it is the lower crank belt pulley I am looking for .

Here's a picture of the 16v part I have and am looking for one of an 8 valve.

Simon

Attachments:
IMG_1205-640x480.JPG
IMG_1205-640x480.JPG [ 34.27 KiB | Viewed 3328 times ]

Author:  scam75 [ Tue Jul 03, 2018 9:44 am ]
Post subject:  Re: 944 8 valve lower crank pulley wanted

No worries. It's the alternator drive pulley I have. Good luck.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/