TIPEC

The TIPEC Forum
It is currently Thu Nov 15, 2018 10:27 pm
Asset Trust


All times are UTC [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: 2.7 engine bits everything bar the head and above,
PostPosted: Sun Mar 04, 2018 6:30 pm 
Offline

Joined: Mon Oct 24, 2011 9:02 pm
Posts: 129
TIPEC membership: 0
As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy

_________________
My Porsche 968

http://www.unklescars.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Mon Mar 05, 2018 1:16 am 
Offline

Joined: Sun Feb 24, 2008 8:16 pm
Posts: 1555
Location: UK
TIPEC membership: 0
ab54666 wrote:
As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy


I wouldn't mind having the block, I'm miles from you in Cambs though.


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Mon Mar 05, 2018 7:54 am 
Offline

Joined: Mon Oct 24, 2011 9:02 pm
Posts: 129
TIPEC membership: 0
pauly wrote:
ab54666 wrote:
As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy


I wouldn't mind having the block, I'm miles from you in Cambs though.


Cambridge is about 1hr 45 away from me, bring a big car and take the lot, you'll more than cover your fuel on seller other bits on!

_________________
My Porsche 968

http://www.unklescars.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Mon Mar 05, 2018 3:40 pm 
Offline

Joined: Sun Feb 24, 2008 8:16 pm
Posts: 1555
Location: UK
TIPEC membership: 0
ab54666 wrote:
pauly wrote:
ab54666 wrote:
As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy


I wouldn't mind having the block, I'm miles from you in Cambs though.


Cambridge is about 1hr 45 away from me, bring a big car and take the lot, you'll more than cover your fuel on seller other bits on!


I absolutely hate driving in London though, and my Mrs told me I've got to stop collecting garage ornaments :( .


What other bits? :)


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Thu Mar 08, 2018 10:20 pm 
Offline

Joined: Mon Oct 24, 2011 9:02 pm
Posts: 129
TIPEC membership: 0
Basically I bought a 2.7 engine so it was the full engine with Alternator etc still on it, I removed the head and stripped it down but the rest is still left. Come down the M11 and through the blackwall tunnel, you don't need to go through central London.

_________________
My Porsche 968

http://www.unklescars.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Fri Mar 09, 2018 3:20 am 
Offline

Joined: Sun Feb 24, 2008 8:16 pm
Posts: 1555
Location: UK
TIPEC membership: 0
ab54666 wrote:
Basically I bought a 2.7 engine so it was the full engine with Alternator etc still on it, I removed the head and stripped it down but the rest is still left. Come down the M11 and through the blackwall tunnel, you don't need to go through central London.


I did the same a few years ago, just kept the head and the block. I don't think there's much demand for the rest. Don't bin the short engine, if no one has it I'll get down there one day :) .


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Sun Mar 11, 2018 4:10 pm 
Offline

Joined: Sat Feb 18, 2017 6:10 pm
Posts: 26
Location: Rainham, Kent
TIPEC membership: 0
Is this still available?


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Mon Mar 12, 2018 9:48 pm 
Offline

Joined: Sun Feb 24, 2008 8:16 pm
Posts: 1555
Location: UK
TIPEC membership: 0
Big Tomm wrote:
Is this still available?


There's a queue....


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Mon Mar 12, 2018 10:45 pm 
Offline

Joined: Mon Oct 24, 2011 9:02 pm
Posts: 129
TIPEC membership: 0
No firm takers, so still up for grabs.

_________________
My Porsche 968

http://www.unklescars.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Tue Mar 13, 2018 8:57 am 
Offline

Joined: Sat Feb 18, 2017 6:10 pm
Posts: 26
Location: Rainham, Kent
TIPEC membership: 0
pauly wrote:
Big Tomm wrote:
Is this still available?


There's a queue....


Is there? All I read was logistical related discussions as I didn’t want to step on toes. In which case can I join the queue?

ab54666 wrote:
No firm takers, so still up for grabs.


I am just down the road from you. If my position in the queue reaches the front can you please let me know and I can arrange to pop up to you one evening.

Thanks.


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Wed Mar 14, 2018 10:48 pm 
Offline

Joined: Mon Oct 24, 2011 9:02 pm
Posts: 129
TIPEC membership: 0
As far as I can see there is no queue, no one has said 'can I come and get it'

Big Tomm, pop on over one evening, drop me a PM with your details and i'll give you my address etc.

_________________
My Porsche 968

http://www.unklescars.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: 2.7 engine bits everything bar the head and above,
PostPosted: Wed Jun 13, 2018 12:10 pm 
Offline

Joined: Thu Apr 07, 2011 2:34 pm
Posts: 130
TIPEC membership: 0
Hello,

Is this still available?


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: Majestic-12 [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group